Part Number for Gurney Flap Bolt?

[TallyMach1]

Does anyone know the part number for the longer Gurney flap bolts? I installed the flap today and while attempting to torque one of the bolts to the recommended 5.4nm, the T20 bit slipped and rounded inside the bolt head. I can't tighten it any further, so I'd like to get another one of the bolts so I can replace the one I messed up. I'd rather not have to buy a whole new flap for just a single bolt.

Sponsored

 

[Skye]

Short (4mm) and long (10mm).

KR3Z-63442K03-A is the PN# for both, to be bought as one item, two bags.

 

[TallyMach1]

Awesome, thanks! I had the bag, but that number is pretty useless.

 

[Skye]

https://www.mustang6g.com/forums/threads/remove-torx-from-gurnee-flap-with-stripped-head.192392/

Above is a recent thread of a Member with something of a like experience.

I don't think there's anything wrong with the instructions or chronic with the design or materials. Maybe needs to be approached with a bit more caution or delicate touch than similar items.

 

[Mach1Kid96]

This thread has some good information about aftermarket security screws for the Gurney Flap. Aftermarket Gurney Flap Security Screws Link

I went this route for the long screws for the flap (the ones you use when attaching the flap). I used stainless steel T27 Torx screws, black oxide washers, and a very thin fibrous-like washer to keep the washer from marring the flap surface. These are the according part numbers I used from McMaster Carr to make my own screw setup: 91900A862, 90377A127, and 90089A325.

If you need a T27 driver or bit for torquing the new screws down, McMaster Carr sells those as well.

They're a lot more stout than the stock screws and take the torque much better than the stock screws.

 

[SL8888]

My 19, GT-350 came with the handling package (Gurney Flap) in the trunk. The package had no screws in it to attach it to the “Swing” and they had no part # for just the screws.
I stopped by the dealer today asking what price & availability is. Back order with no ETA.
Had them print off for me and Shit a Brick sideways when I got the price

 

[Skye]

Shit a Brick sideways when I got the price

I ran the PN# at www.Fairwayfordparts.net , a site/dealer in OH. I've bought from them before and always gotten good service.

https://www.fairwayfordparts.net/oem-parts/ford-kit-rear-spoiler-repair-kr3z63442k03a

They are currently listing the PN# at a 30% discount. If anything, you could put it on backorder with them at the cheaper price.

Levittown Ford might also offer a good deal.

Edit: Fairway Ford is 200 mi / 320 km away. . IDK what they'd charge for shipping, or if they can ship to your local dealer through Ford's network. Price matching?

 

[MAGS1]

My 19, GT-350 came with the handling package (Gurney Flap) in the trunk. The package had no screws in it to attach it to the “Swing” and they had no part # for just the screws.
I stopped by the dealer today asking what price & availability is. Back order with no ETA.
Had them print off for me and Shit a Brick sideways when I got the price

Tasca Ford has them for $35 and buyfordpartsdirect. com has them for $36. oemfordpartsdirect. com also has them for $35. All 3 show them In Stock

 

[SL8888]

Tasca Ford has them for $35 and buyfordpartsdirect. com has them for $36. oemfordpartsdirect. com also has them for $35. All 3 show them In Stock

Hey Gentlemen, thanks for the options to get the correct screws from good sources.
$5 per screw to acquire the correct ones is probably not such a bad thing when I think about how I’ve spent other $$$

 

[TallyMach1]

Tasca Ford has them for $35 and buyfordpartsdirect. com has them for $36. oemfordpartsdirect. com also has them for $35. All 3 show them In Stock

I'll check those out. My local dealer today has them as backordered with no ETA at $54.

 

[MAGS1]

Hopefully they have them in stock for you guys. I would assume since they say In Stock they have them, especially Tasca. They’re usually pretty good about showing what they actually have on hand.

 

[TallyMach1]

I went with the McMaster hardware. All the ford parts sites said ships from manufacturer once I added them to my cart, so I don't think they actually have them in stock. McMaster hardware should be delivered Thursday and for less than what Ford wants.

 

[WD Pro]

Just an option for future and if :

A) Security screws aren't required.
B) You are not totally set on having OE bolts.

I would be tempted to use stainless cap heads (cheap) and ally cup washers, either in black or body (or pinstripe) colour matched :

Photo as an example only - you can get them in various diameters (for the same bolt size) and to suit CSK or cap head bolts etc.

I think orange on a FJG car or red on the white cars with a red pinstripe, would look really cool

For some extra bling / bragging rights, you could swap the bolts out for titanium and still come in at under half price of the OE Ford bolts ...

WD

 

[Mach1Kid96]

Just an option for future and if :

A) Security screws aren't required.
B) You are not totally set on having OE bolts.

I would be tempted to use stainless cap heads (cheap) and ally cup washers, either in black or body (or pinstripe) colour matched :

Photo as an example only - you can get them in various diameters (for the same bolt size) and to suit CSK or cap head bolts etc.

I think orange on a FJG car or red on the white cars with a red pinstripe, would look really cool

For some extra bling / bragging rights, you could swap the bolts out for titanium and still come in at under half price of the OE Ford bolts ...

WD

I like these! Thanks for throwing this out there! Gonna have to look into these!

 

[WD Pro]

I like these! Thanks for throwing this out there! Gonna have to look into these!

Going off topic, but I've got them in a few places around and under the car :

WD

Sponsored