A little help from the USA please.

[Gloucesternige]

Hi. I am in the UK and have a ‘17 GT. I want to fit a US, (LHD) left side engine mount in order to get rid of the awful RHD oil cooler.
Can anyone tell me the length and thread of the bolts that go into the engine block to locate the left cast aluminum mount please. Or, if you have a Ford p/n that would be great.
RHD cars have a long casting there for the oil cooler so the bolts will be too long for the US casting.
Thanks

Sponsored

 

[Cobra Jet]

Hi. I am in the UK and have a ‘17 GT. I want to fit a US, (LHD) left side engine mount in order to get rid of the awful RHD oil cooler.
Can anyone tell me the length and thread of the bolts that go into the engine block to locate the left cast aluminum mount please. Or, if you have a Ford p/n that would be great.
RHD cars have a long casting there for the oil cooler so the bolts will be too long for the US casting.
Thanks

You can try @LevittownFordParts and see if they can help with the part numbers. I'm not sure if they will be able to since it's crossing a US with a Euro part, but it's worth a shot to inquire with them - they are very helpful on this forum.

 

[Gloucesternige]

You can try @LevittownFordParts and see if they can help with the part numbers. I'm not sure if they will be able to since it's crossing a US with a Euro part, but it's worth a shot to inquire with them - they are very helpful on this forum.

Thank you buddy

They may even have a pets breakdown on their site.

 

[Earlsays]

ENGINE MOUNT: FR3Z*6038*C
ENGINE MOUNT HEAT SHIELD: FR3Z*6C038*B
ENGINE MOUNT BOLT 2 REQ. *W713078*S439
LH BRACKET: BR3Z*6031*C
BRACKET STUD: *W714924*S900
BRACKET BOLT: *W500723*S439
BRACKET NUT FOR TOP STUD ON ENGINE MOUNT: *W712530*S440

 

[Gloucesternige]

ENGINE MOUNT: FR3Z*6038*C
ENGINE MOUNT HEAT SHIELD: FR3Z*6C038*B
ENGINE MOUNT BOLT 2 REQ. *W713078*S439
LH BRACKET: BR3Z*6031*C
BRACKET STUD: *W714924*S900
BRACKET BOLT: *W500723*S439
BRACKET NUT FOR TOP STUD ON ENGINE MOUNT: *W712530*S440

Brilliant!! Thank you so very much!!
I have the bracket already and thought I had the wrong part!! Turns out the part you listed has a different “EN” number????
Can you please tell me how many of the bracket studs/ bolts I need? I assume two of each? Studs top and bolts at bottom?

 

[Earlsays]

All the numbers I listed on the RH lower side of this image is the LH (USA DRIVERS SIDE) of the car

HT1 = W714924*S900 - Looks like you'll need two - SPECS: M10 X 22MM + M10 X 55 MM - I think there are two different specs on each side combined into one part

HB2 = W500723*S439 - I believe you'll need two of these as well - SPECS: M10 X 55MM

HB1 = W713078*S439 - You'll need two - SPECS: M10 X 45

 

[Gloucesternige]

All the numbers I listed on the RH lower side of this image is the LH (USA DRIVERS SIDE) of the car

HT1 = W714924*S900 - Looks like you'll need two - SPECS: M10 X 22MM + M10 X 55 MM - I think there are two different specs on each side combined into one part

HB2 = W500723*S439 - I believe you'll need two of these as well - SPECS: M10 X 55MM

HB1 = W713078*S439 - You'll need two - SPECS: M10 X 45

Thank you so very much for your help here.. I have now looked through the Manual and have noticed the LH engine mount actually has 3 off bolts and one off stud bolt in the bottom right position.

Sponsored