gcadorette13
PoopStang
- Thread starter
- #1
Currently on a base tune after I installed cams on my 2016. After the car warms up it idles really rough and usually dies. STFT's swing about 30% both ways. The only changes I made was the cams and the fews parts that go along with that. No CEL's
Car ran pretty good before the cams. It has new O2's, brand new MAF. The CJ has been on the car for a few years so i don't think it's a vacuum leak from that. I have removed the intake a couple times in hope that it was something that simple. Logs are showing cams are at 0 during idle so it might not be the phasers or solenoids. I am thinking of replacing the solenoids just because they are pretty cheap.
Kind of at a loss on what to try next for troubleshooting. I want to rule out everything before I just take it to a shop. What do you guys think?
Car ran pretty good before the cams. It has new O2's, brand new MAF. The CJ has been on the car for a few years so i don't think it's a vacuum leak from that. I have removed the intake a couple times in hope that it was something that simple. Logs are showing cams are at 0 during idle so it might not be the phasers or solenoids. I am thinking of replacing the solenoids just because they are pretty cheap.
Kind of at a loss on what to try next for troubleshooting. I want to rule out everything before I just take it to a shop. What do you guys think?
Sponsored