What did you do to your Mach 1 today

[MLO 351]

HP rear wing, gurney flap painted & installed, front splitter on.

Sponsored

 

[Mikepol2]

HP rear wing, gurney flap painted & installed, front splitter on.

Looks great and BTW I am super jealous of you Aussies and your leaves on the trees! We haven't seen a leaf in about 3 months!

 

[JG M1]

Like your plate Number!!

 

[traxiii]

You right… twice I’ve put flaps on her and twice they’ve been stolen… I just stopped after that.

Mud Flap thieves when caught should have to personally take the flaps place for 100 miles in weather like you towed you M1 through. Then put away wet.

 

[Stage_3]

Gorgeous!

 

[Rynoe]

Added the mounting hardware for the Novistretch mesh front cover yesterday. It’s normally off and more for the longer trips. I learned from my last car that when a rock hits one of your radiators it’s not easy nor cheap to fix!

the instructions aren’t clear but the points you need to add clips and screws are here:

 

[Vertex]

HP rear wing, gurney flap painted & installed, front splitter on.

I don’t have the gurney flap on mine yet or taken it out of the bubble wrap, is it really not the same color as the spoiler?

 

[Ratical]

I don’t have the gurney flap on mine yet or taken it out of the bubble wrap, is it really not the same color as the spoiler?

I think he has purchased a Handling Pack spoiler and flap (factory black) and had it painted magnetic.

 

[MLO 351]

I think he has purchased a Handling Pack spoiler and flap (factory black) and had it painted magnetic.

Correct as above. Thanks Ratical.

 

[traxiii]

Added the mounting hardware for the Novistretch mesh front cover yesterday. It’s normally off and more for the longer trips. I learned from my last car that when a rock hits one of your radiators it’s not easy nor cheap to fix!

the instructions aren’t clear but the points you need to add clips and screws are here:

Ewww, ewww, take it off, it looks like one of those Mock E thingies. I hope it works well and looks better in person.

 

[Rynoe]

Ewww, ewww, take it off, it looks like one of those Mock E thingies. I hope it works well and looks better in person.

Haha oh sadly no it doesn't in person not my favorite mod. I took it off right after making sure it fits right. Definitely works well though and I'd recommend for anyone doing road trips. taking off or putting on takes maybe 30 seconds.

 

[ChitownStang]

I'm going with the PPF wrap on the front bumper, front fenders, and the hood cut around the sticker.
Got a couple chips after 7500 miles and I'm fed up so I bit the bullet and spent $1400.
It's in the shop now.

 

[cerbomark]

Added the mounting hardware for the Novistretch mesh front cover yesterday. It’s normally off and more for the longer trips. I learned from my last car that when a rock hits one of your radiators it’s not easy nor cheap to fix!

the instructions aren’t clear but the points you need to add clips and screws are here:

so after reading direction the last item says not to pull mesh over corner of air dam? Your is.??

 

[Rynoe]

so after reading direction the last item says not to pull mesh over corner of air dam? Your is.??

Hmm I’m not sure about that. I see it in the instructions but everyone else seems to just pull it over.

Maybe it’s just a generic instruction not meant for mustangs? I may reach out to Novistretch about this one. If they respond I’ll reply back:

update: Yup! Just an old instruction left over from a corvette installation. They said to ignore that last part about the air dams.

 

[ChemEng44]

This is what I did today

Sponsored