What did you do to your S550 Mustang today?!

[Thesauerchise]

Took it out of the garage so I could install a new garage door opener.
You can see “the fleet” in the background. Wife’s Tiguan, my DD Optima. Step daughters brand new Elantra is only one missing.

Sponsored

 

[decableguy2000]

Went for a spin on back roads through the mountains of about 40 miles and didn't see one traffic light then we hit up the Blue ridge Park way for a 70ish mile loop. Perfect day for a ride

 

[Orange devil]

Did you know the original Michael Myers mask was made from a mold of William Shatner’s face.

I did know that. I don't think a mask of Leonard would have had the same effect. Also did you know OJ Simpson was supposed to be the original terminator. And that baby Pumpkinhead looks like Sam from trick-or-treat. Also the new tales from the crept series ,the Crept keeper has the original eyes from the chucky doll .

 

[compprep]

After pulling summers tires for cold weather ones, noticed the 275/40-19 PS4 RR had a small silver thing maybe an inch from the outside edge. pulled out a 1" nail, SSSSSSSSSSSSSSSSSSSS.
F*^# me!!

Too close to edge to pro patch. Not sure I want to plug it myself. Tire has lots of tread left too. As least I have all winter to look for a used one with approx same tread depth.

 

[shogun32]

Too close to edge to pro patch. Not sure I want to plug it myself. Tire has lots of tread left too. As least I have all winter to look for a used one with approx same tread depth.

mushroom plug.

 

[m3incorp]

I've used the Adams, Xpel, and Optimum Waterless and they all do a great job for what they are intended for.

QUOTE="Stage_3, post: 3401990, member: 17124"]
I love the Adam's waterless wash. Works great when the vehicle isn't really dirty, like my Mustang. It only gets a little dusty and dirty. Never out in rain or wet pavement. Never use a waterless wash on a heavily dirty vehicle. Make sure you get the right waterless wash towels and use the proper method and you're good. Works awesome. (PM me if you want to know exactly what I use.)
I haven't tried any other brands because I like the Adam's as it is only a wash and doesn't really have any polishes or waxes in it. Just a wash, which is what I want.
[/QUOTE]

 

[kiksbutt]

Started Saturday, finished Sunday moments before a 200 mile road trip… Today I’m enjoying the crap out of the new PP2 brakes. I finally feel like my car is exactly where I want it to be, and I can enjoy driving what I’ve put together until the wheels fall off…

The bullitt calipers? How was the install?

 

[TicTocTach]

The bullitt calipers? How was the install?

Plain PP1 / PP2 Brembo's that I painted with G2 red. I liked the look of the Bullitt pieces, but got a deal on the gray/black ones and decided to paint them. Install wasn't bad, just took me a while because I hadn't done that job before (on a Mustang) and I didn't want to scratch my shiny bits...

 

[TundraOnKings]

Finally picked up a street wheel/tire setup. Wheels only came in gray, and since my track setup was gray (19x10 squared Apex SM10’s), I powder coated these TSW’s matte black. I think the car looks better now. The larger diameter 285/35/20 fill the gap better (20x10 squared).

 

[Bit_the_Bullitt]

Ohio is the problem, I lived there and every minute was terrible, lmao

Well dang. Hey, we actually like it here. Good beer

Last wash, parked the car for winter and just finished installing battery tender see you in April!

Get ya a set of winters and go nuts!

Plain PP1 / PP2 Brembo's that I painted with G2 red. I liked the look of the Bullitt pieces, but got a deal on the gray/black ones and decided to paint them. Install wasn't bad, just took me a while because I hadn't done that job before (on a Mustang) and I didn't want to scratch my shiny bits...

I was gonna say, I think PP1 and PP2 brakes are the same, but also noticed those look very similar to my Bullitt's.

Do other PP1 GTs (which is partially what the Bullitt is) have different color calipers?

Also, how's your brake squeal? I get a pretty bad one when slowing down from like 30 to single digits at a stop sign, sounds horrible.
Not sure I want to be taking everything down and putting lube in there.

Maybe when I put on the winter set in about a month I'll do it...

 

[shogun32]

Do other PP1 GTs (which is partially what the Bullitt is) have different color calipers?

there are 3 colors - ugly-ass mottled gray (vast majority), shiny black, red (and now Mach1 orange). Red only comes on Bullitt (and Mach1) or people like me swapped their gray ones for new. One of the trim packages back in '18/19 timeframe got the Black version.

All of them are available thru your favorite parts supplier.

 

[WoodburnGT]

Ordered Weld 17x10’s and 18x5’s.

 

[GTP]

Also, how's your brake squeal? I get a pretty bad one when slowing down from like 30 to single digits at a stop sign, sounds horrible.
Not sure I want to be taking everything down and putting lube in there.

Maybe when I put on the winter set in about a month I'll do it...

You can just remove your wheels and then pull the brake pads out without removing the calipers. Put a very thin layer of brake grease on both sides of the backer plates.

 

[Bit_the_Bullitt]

You can just remove your wheels and then pull the brake pads out without removing the calipers. Put a very thin layer of brake grease on both sides of the backer plates.

Always thought you have to remove the calipers and pins and the entire bracket to do this. Might have to take care of this when the winter set goes on the Bullitt.
Looking at the weather, that's about 2 weeks from now.

 

[Roy 3Fidy]

Last wash, parked the car for winter and just finished installing battery tender see you in April!

Which Tender did you go with?

Sponsored