Sponsored

Handling Package for a Street Driven Car?

TxGT350-52

Well-Known Member
Joined
Nov 1, 2019
Threads
20
Messages
401
Reaction score
255
Location
SE Texas
Vehicle(s)
2018 GT350 Lead Foot, 2021 Diesel Tremor CG
Are there any advantages to the Handling Package for a car that will be driven 100% on the street? (casual weekend driving) Are there any disadvantages?

I have my name in at several dealers when the 2022 allocations become available, so I want to have my options ready.
Sponsored

 

Jimmy Dean

Well-Known Member
Joined
Jul 26, 2019
Threads
34
Messages
2,133
Reaction score
2,612
Location
Gonzales / Pierre Part
First Name
Al
Vehicle(s)
71 mach 1, 82 Bronco, 86 Bronco (dd),
yes to both.

it is up to you to weigh them. my car will be 99.99% street driven. still getting the HP. Looks, performance, heritage....but also my car is a forever car, I'll likely never sell it. my son will get it in 40 years.

advantages? still handles better, can push more limits on weekend cruises in the twisties. disadvantages? expensive tires, expensive up front, less clearance, going to be a pita in regards to parking lots and speed bumps, and driveways and such. everyone and their momma is gonna try to run ya.

(I'ma add, I am not getting a 500, I cannot play at that level, just a mach. there is a track pack 500 near me though, and every time I see a challenger or camaro near him at a light they all start lighting up tires, even in the middle of the day the spoiler and wheels and stuff just make the car stand out more than the 'base')

oh...the wheels. do yourself a favor if you go with the CFTP, get some aluminum wheels for the street. seen a few posts of people trashing a wheel in a pot hole at 4k a piece.
 
Last edited:

NightmareMoon

Well-Known Member
Joined
Nov 22, 2015
Threads
62
Messages
7,062
Reaction score
6,324
Location
Austin
Vehicle(s)
2016 Mustang GT PP w/ Voodoo
Vehicle Showcase
1
Casual driving? None.

The aero bits will only reduce your gas mileage (a small fraction), the marginal grip they give at high speed won't be needed if you aren't approaching the lateral grip limits of the car (which you won't be casually driving it on the street). The catch can is a nice to have, but I don't think you're likely to ever notice the difference in any practical way, and emptying it is one more maintenance item to remember when you do oil changes.
 
OP
OP
TxGT350-52

TxGT350-52

Well-Known Member
Joined
Nov 1, 2019
Threads
20
Messages
401
Reaction score
255
Location
SE Texas
Vehicle(s)
2018 GT350 Lead Foot, 2021 Diesel Tremor CG
yes to both.

it is up to you to weigh them. my car will be 99.99% street driven. still getting the HP. Looks, performance, heritage....but also my car is a forever car, I'll likely never sell it. my son will get it in 40 years.

advantages? still handles better, can push more limits on weekend cruises in the twisties. disadvantages? expensive tires, expensive up front, less clearance, going to be a pita in regards to parking lots and speed bumbs, and driveways and such. everyone and their momma is gonna try to run ya.
I am not talking about the CFTP or CFHP, just the boring HP at $1750. I do not think the tires are any different than the ones on a base GT500.

Thanks for your insight on the parking lots and speed bumps, as I had not considered them. I will also use it as my airport car for when I start traveling again. I do the same with my GT350, which is why I did not want the 350R.
 

rp930

Well-Known Member
Joined
Aug 27, 2021
Threads
2
Messages
400
Reaction score
454
Location
CO
First Name
Rick
Vehicle(s)
2021 Shelby GT500, 2019 Ranger, 2015 MB GLK250
Casual driving? None.

The aero bits will only reduce your gas mileage (a small fraction), the marginal grip they give at high speed won't be needed if you aren't approaching the lateral grip limits of the car (which you won't be casually driving it on the street). The catch can is a nice to have, but I don't think you're likely to ever notice the difference in any practical way, and emptying it is one more maintenance item to remember when you do oil changes.
The oil separator self empties.
 

Sponsored

Jimmy Dean

Well-Known Member
Joined
Jul 26, 2019
Threads
34
Messages
2,133
Reaction score
2,612
Location
Gonzales / Pierre Part
First Name
Al
Vehicle(s)
71 mach 1, 82 Bronco, 86 Bronco (dd),
I am not talking about the CFTP or CFHP, just the boring HP at $1750. I do not think the tires are any different than the ones on a base GT500.

Thanks for your insight on the parking lots and speed bumps, as I had not considered them. I will also use it as my airport car for when I start traveling again. I do the same with my GT350, which is why I did not want the 350R.
in that case, nota big difference, doesn't look like it'll affect the ground clearance at all either, so, no major advantages/disadvantages for the HP.
 

Epiphany

Well-Known Member
Joined
Oct 11, 2015
Threads
75
Messages
7,952
Reaction score
13,540
Location
Global
Vehicle(s)
I like to disassemble things.
The aero bits will only reduce your gas mileage (a small fraction), the marginal grip they give at high speed won't be needed if you aren't approaching the lateral grip limits of the car (which you won't be casually driving it on the street).
We've discussed this before. If you aren't operating at speed, the drag from the wickers/Gurney Flap isn't going to kill the already abysmal fuel economy.

My advice, whether you intend to track the car or not, get the handling package. The factory installed camber plates will give an alignment tech more opportunity to hit a target number when/if you ever need an adjustment made. The separator is a good idea as it will serve to reduce IC and combustion chamber contamination. And since both the wickers and the flap bolt on, you can simply leave them in the factory boxes and never install them if you so desire. The option will serve to increase value as time passes.
 

Wolvee

Well-Known Member
Joined
Dec 8, 2017
Threads
41
Messages
526
Reaction score
367
Location
Williamsburg
Vehicle(s)
2021 Shelby GT500
Even if it's 1-2mpg less, what does it matter? It looks better with them. We're not talking about some Time Attack spec aero here. You're already going to pull into parking lots at an angle if it has a questionable approach angle.
 
OP
OP
TxGT350-52

TxGT350-52

Well-Known Member
Joined
Nov 1, 2019
Threads
20
Messages
401
Reaction score
255
Location
SE Texas
Vehicle(s)
2018 GT350 Lead Foot, 2021 Diesel Tremor CG
We've discussed this before. If you aren't operating at speed, the drag from the wickers/Gurney Flap isn't going to kill the already abysmal fuel economy.

My advice, whether you intend to track the car or not, get the handling package. The factory installed camber plates will give an alignment tech more opportunity to hit a target number when/if you ever need an adjustment made. The separator is a good idea as it will serve to reduce IC and combustion chamber contamination. And since both the wickers and the flap bolt on, you can simply leave them in the factory boxes and never install them if you so desire. The option will serve to increase value as time passes.
Are the aero items and separator installed by the dealer as part of the price? Or, do I have to do it or pay for it myself?
 

Sponsored
OP
OP
TxGT350-52

TxGT350-52

Well-Known Member
Joined
Nov 1, 2019
Threads
20
Messages
401
Reaction score
255
Location
SE Texas
Vehicle(s)
2018 GT350 Lead Foot, 2021 Diesel Tremor CG
They come in boxes. Uninstalled.
Yes, I got that. On the Tremor Super Duty you order a Winch with the truck and the dealer installs it as part of the price you paid. The winch ships in a box to the dealer. :sunglasses:

I am asking if it is the same idea with the HP for the GT500.
 

NightmareMoon

Well-Known Member
Joined
Nov 22, 2015
Threads
62
Messages
7,062
Reaction score
6,324
Location
Austin
Vehicle(s)
2016 Mustang GT PP w/ Voodoo
Vehicle Showcase
1
We've discussed this before. If you aren't operating at speed, the drag from the wickers/Gurney Flap isn't going to kill the already abysmal fuel economy.

My advice, whether you intend to track the car or not, get the handling package. The factory installed camber plates will give an alignment tech more opportunity to hit a target number when/if you ever need an adjustment made. The separator is a good idea as it will serve to reduce IC and combustion chamber contamination. And since both the wickers and the flap bolt on, you can simply leave them in the factory boxes and never install them if you so desire. The option will serve to increase value as time passes.
Might as well get ALL the things the OP doesn't need. Carbon fiber track pack or go home. its 'better' after all, and since we're spending someone else's money, why not?
 
OP
OP
TxGT350-52

TxGT350-52

Well-Known Member
Joined
Nov 1, 2019
Threads
20
Messages
401
Reaction score
255
Location
SE Texas
Vehicle(s)
2018 GT350 Lead Foot, 2021 Diesel Tremor CG
Might as well get ALL the things the OP doesn't need. Carbon fiber track pack or go home. its 'better' after all, and since we're spending someone else's money, why not?
HAHA! I really do not need the CF wheels, but hey, it is just money...
 

Evolvd

Instigator
Joined
Jan 19, 2015
Threads
186
Messages
6,865
Reaction score
5,867
Location
Northwest Florida
First Name
Brian
Vehicle(s)
2021 Shelby GT500
I bought the handling pack knowing my car would most likely never see a track, but I love the looks of it.
Sponsored

 
 








Top