ethanhunter34
Well-Known Member
- Thread starter
- #1
Hi looking to go 19 or 20 6GR wheels 5spoke. Anyone has them on stock suspension? Looking to get Ford performance lowering springs later down the road.. any pics
Thanks
Thanks
Sponsored
Square 19x10s, so 285/35 front and rear. No complaints, wheels are good quality and the satin black finish has held up well for the 4.5 years I've owned them.Thank you! They do look good.. what size tire your running 285 and 325
Nice setup. Are you running any spacers?Square 19x10s, so 285/35 front and rear. No complaints, wheels are good quality and the satin black finish has held up well for the 4.5 years I've owned them.
No spacers. I should add, most aftermarket wheels will have around the same backspacing and offset to make it flush with the fenders, but kinda stick out at the bottom. So the moment you get new wheels and tires, I highly recommend ordering paint protection vinyl film that’s cut out to fit the area in front of the rear wheels. That part of the body will get trashed real quick by road debris/rocks.Nice setup. Are you running any spacers?
Sometimes I run a 5mm front spacer because I run more than typical front camber and have some extra fender clearance from that.Nice setup. Are you running any spacers?
What is the offset? I like your set up, looks nice.I have the 7 spoke wheels on mine. 19x10 with 275/35 front, 19x11 with 305/35 rear, Michelin Pilot Sport tires, BMR lowering springs. I may soon get them swapped for Ford Performance springs as the the higher rear stance on my car has bugged me for a while now.
@NightmareMoon did you need to play with offsets or are they standard? Any poke front or rear?Square 19x10s, so 285/35 front and rear. No complaints, wheels are good quality and the satin black finish has held up well for the 4.5 years I've owned them.
Not really. I think its marginal poke in the rear for stock alignments, but I'm running a bit of track camber back there so they fit really well.@NightmareMoon did you need to play with offsets or are they standard? Any poke front or rear?
Fronts are 35mm, rear is 50mm.What is the offset? I like your set up, looks nice.