Sponsored

Project 6gr wheels - 285/35/19 or 295/30/19 for front?

NatJoo

Active Member
Joined
Aug 20, 2018
Threads
5
Messages
33
Reaction score
8
Location
Edwardsburg, Mi
First Name
Nathan
Vehicle(s)
2016 Mustang Gt
Purchased stagered 10/11 wheels for my 2016 GT. It is on steeda coil-overs and currently has 255/35/20’s with a .75 inch spacer. This has a pretty good gap and like the look. Planning on running 325/30/19 toyo r888r’s in the rear. For fronts i see way more people running 285/35’s than 295/30’s. This does make the front tires about a quarter inch taller than the rears I believe and this bothers my OCD. Wondering how well the 295’s would fit. Also a little worried about the 30 series front opening up the gap a bit as they would be about an inch shorter than my current tires. The coil overs are pretty close to all the way down. Could swap out the sprint for something shorter I suppose. Also adding a blower in the spring and that may drop it slightly. What does everyone think? Anyone with experience with 295’s in the front?
Sponsored

 

Grintch

Well-Known Member
Joined
Nov 7, 2014
Threads
15
Messages
1,892
Reaction score
792
Location
Hunstville
Vehicle(s)
2015 GT PP
Why would you buy 10" wheels that need a 0.75" spacer?

295 can be done but is in the zone that the offset, setup, and hardware have to be right. 285 is fairly forgiving. Tire selection may also be an issue.
 
OP
OP

NatJoo

Active Member
Joined
Aug 20, 2018
Threads
5
Messages
33
Reaction score
8
Location
Edwardsburg, Mi
First Name
Nathan
Vehicle(s)
2016 Mustang Gt
No the spacers are on the current 20 inch wheels. They are only 8 1/2 wide so the spacers brought them out to look better. Will not be running spacers with the new wheels. The old wheels were just borrowed from a friend.

Definitely better selection with the 285/35’s but acouple good options for the 295’s. Think the toyo r888r or the cup 2’s come in that size.
Sponsored

 
 




Top