Norm Peterson
corner barstool sitter
Probably did. It's not a car-specific matter (for me at least). Turning it way down and lowering the display as far as it can go might be enough; I just have a DIY plan in place if it isn't.Hi Norm. I thought we went through this over on the Camaro forums...But as a reminder, you definitely can get rid of the HUD in the Camaro by simply turning it off. There's an intensity adjustment, for example to turn down the intensity at night, but turn it up in bright sunlight. The HUD becomes invisible if you turn down the intensity all the way. Just like it wasn't there. It's a physical knob, so it stays that way until you change it manually.
Yup. I have the annunciator lights (sometimes on both Aeroforce gauges) set to 100 rpm below the redline indication on the tach for exactly the same reason. It's been good enough so far (and it'd be on me to change the setting if/when it ever stops being enough . . . I can handle that, too).For me, the HUD is indispensable on the track just for F1-style shift lights. Both F1 and IndyCar have the same lights at the top of the steering wheel. On the Camaro, they start to appear around 4500 rpm or so as green dots on either side of the HUD display. The dots converge from both sides to the center of the display, turning yellow, and finally red when you get to 6000 rpm. Redline is 6500, so the red shift lights are a good indicator when to upshift.
Norm
Last edited:

