Sponsored
S550Will
Well-Known Member
- Joined
- Jun 10, 2020
- Threads
- 8
- Messages
- 81
- Reaction score
- 21
- Location
- Morrow, OH
- First Name
- Will
- Vehicle(s)
- 2020 Mustang GT PP1
I actually made up a set of drawings. Just haven't found a local shop to do the work.I just had a complete bracket and lockout set made out of aluminum from a forum member's drawings.
MyStang
Well-Known Member
S550Will,
I found the drawings I sent into the machine shop are off slightly. I will be sending them an updated revision for the rails this will make the fit and finish spot on.
I found the drawings I sent into the machine shop are off slightly. I will be sending them an updated revision for the rails this will make the fit and finish spot on.
S550Will
Well-Known Member
- Joined
- Jun 10, 2020
- Threads
- 8
- Messages
- 81
- Reaction score
- 21
- Location
- Morrow, OH
- First Name
- Will
- Vehicle(s)
- 2020 Mustang GT PP1
Looks good. I already have the lockouts. I just need the brackets.
Zelek
Well-Known Member
I would really like to use my 17 engine cover again. Is anyone making or selling brackets? Seems like this is a good business opportunity.
Sponsored
TeamDenno
Well-Known Member
Just find a panel shop - I had one fashion me up a fix in a few hours. Sits a few mm higher than the stock manifold, but still easily fits under the strut brace.
Last edited:
TexasMetallic5.0
Well-Known Member
I hated my 18 engine cover and just cut the center section out and threw it back on.
TexasMetallic5.0
Well-Known Member
I know this, Captain Obvious. I had looked for an older engine cover before modifying mine.
Txiceman5.0
New Member
Could you share the drawing/ file of these mounting brackets?I just had a complete bracket and lockout set made out of aluminum from a forum member's drawings.
Sponsored
Strokerswild
Shallow and Pedantic
- Joined
- Nov 7, 2014
- Threads
- 76
- Messages
- 7,103
- Reaction score
- 6,469
- Location
- Southern MN
- First Name
- Dave
- Vehicle(s)
- Things With Wheels
Journey GT 435
Well-Known Member
this is my 2015 with 2018 manifold with a 2018 engine cover and extension filler tube modified.
Journey GT 435
Well-Known Member
I just ordered the 2018 engine cover from e-bay and it fits right on. It does have one issue though, there is an oil extension filler tube that goes on in place of the filler cap and in 2018 Ford changed the thread style on the valve cover, so the 2018 filler tube won't fit in the 2015 valve cover. I bought a 2015 filler tube and cut off the threaded end and bored it out to 1.128" and I bought the 2018 tube and cut off the end that would have gone into the valve cover below the O-ring and pressed it into the 2015 threaded part and JB welded the two parts together.
Sponsored
