New LMR SVE SP2 Wheels (PP2 Replica)

[TicTocTach]

Anyone run 19x10 square set up? I have 305/30/19 all around and don’t want to go to 19x11 w spacers and longer studs for track. Would it cause any problems with narrower width?

305’s will be a little pinched, and will probably poke a bit. With 285’s on 10’s (+35 offset), my fronts are nearly flush and the rears poke a tiny bit. Hopefully some real experience will show up.

Sponsored

 

[kiksbutt]

305’s will be a little pinched, and will probably poke a bit. With 285’s on 10’s (+35 offset), my fronts are nearly flush and the rears poke a tiny bit. Hopefully some real experience will show up.

My pp2 pokes a bit but front is 10.5. Wonder how much more noticible will be on 10

 

[Dr. Norts]

I was hoping they'd release a satin black. Waited all this time. Ah well it is what it is.

Wonder how different the color will be... Makes it shitty for anyone who needs to replace a rim that purchased these anytime before yesterday.

 

[TexasMetallic5.0]

Well that’s just great.

 

[S550_GTCS]

Got any pics?
I still dont know how to post pics on this website but if you have IG you can take a look.

s550_gtcs

 

[spaz mk will]

I was hoping they'd release a satin black. Waited all this time. Ah well it is what it is.

Wonder how different the color will be... Makes it shitty for anyone who needs to replace a rim that purchased these anytime before yesterday.

Interesting.... I’ve avoided these because I find graphite too dark/lacking contrast when on a black car. I would love them in a brighter finish.

 

[MRGTX]

Well, right after thinking that I don't want to sit on $1k worth of wheel inventory that I can't use until spring (on winter tires for the next 5 months...) I just pulled the trigger. I know these are the wheels that I want and the price is fair. At least I can look at them and daydream all winter long.

Two questions:

What's the cheapest source for TPM sensors?

What do you suggest for tires? My goal will be to have a high performance, quality tire that will last around 15k miles with daily use and an occasional autocross.

EDIT: I realize that there will be some variation depending on exact model/brand of tire...but Looking at tire size charts, 285/35/19 has an OD of 26.9" (front) which would be a good match for a 325/30/19 (rear) which has an OD of 26.7" and technically is acceptable on an 11" wide wheel. Can S550s accept a 325 with a +50mm offset?

I was hoping they'd release a satin black. Waited all this time. Ah well it is what it is.

Wonder how different the color will be... Makes it shitty for anyone who needs to replace a rim that purchased these anytime before yesterday.

Well that’s just great.

I just asked them about this on the phone.
Apparently, they're super close but if you're mixing wheels from the new batch with the old batch, you might be able to see a slight difference.

 

[spaz mk will]

Well, right after thinking that I don't want to sit on $1k worth of wheel inventory that I can't use until spring (on winter tires for the next 5 months...) I just pulled the trigger. I know these are the wheels that I want and the price is fair. At least I can look at them and daydream all winter long.

Two questions:

What's the cheapest source for TPM sensors?

What do you suggest for tires? My goal will be to have a high performance, quality tire that will last around 15k miles with daily use and an occasional autocross.

EDIT: I realize that there will be some variation depending on exact model/brand of tire...but Looking at tire size charts, 285/35/19 has an OD of 26.9" (front) which would be a good match for a 325/30/19 (rear) which has an OD of 26.7" and technically is acceptable on an 11" wide wheel. Can S550s accept a 325 with a +50mm offset?




I just asked them about this on the phone.
Apparently, they're super close but if you're mixing wheels from the new batch with the old batch, you might be able to see a slight difference.

There are a few people here running a 295/35 on 11inch rears in order to use Continental ECS or Michelin PS4S. 27.1 OD. Those tires don’t have a 305/35 option. I think @Dave2013M3

I’m fairly certain I’ve seen 325/30 used with SVE 11inch rears by members here. @LSchicago is one with these wheels actually.

 

[TexasMetallic5.0]

I have 325/30 for my 11” rears.

 

[Blade007]

hey guys, quick question. How are the Ohtsu FP8000 Tires in the winter if anyone uses them in the winter?
thanks

 

[Crusch84]

I have 325/30 for my 11” rears.

Stock ride height?

 

[TexasMetallic5.0]

Stock ride height?

Yeah, I’m not lowering mine anytime soon.

 

[kz]

hey guys, quick question. How are the Ohtsu FP8000 Tires in the winter if anyone uses them in the winter?
thanks

Why would anyone consider Ohtsu tires (whatever they are) as something to mount on Mustang or really any car ?

 

[Blade007]

Why would anyone consider Ohtsu tires (whatever they are) as something to mount on Mustang or really any car ?

So you don't know. Got it
Thanks

 

[TexasMetallic5.0]

Why would anyone consider Ohtsu tires (whatever they are) as something to mount on Mustang or really any car ?

I run them on my truck. They’re made by Falken, same tire with a different name on the sidewall.

Sponsored