Managed to scrape some of my front splitter nuts

[torque124]

Hi,


Anyone knows where I can order some spares for the front splitter nuts under the car for the GT350R ? They are in quantity of 10 or something, the longer ones with a with a Torx (T20 I think? ) on the head...
I did New Hampshire motorsports park and that track has a slight raised elevation banked hard right and I managed to scrape 4 of them bit on the left hand side... Splitter is not too bad, some small marks but the screws took all the damage fortunately.
Nuts still come out so not all head is gone, but I would like to replace them. Installed ZL1 addons protectors since...
Many thanks

Sponsored

 

[torque124]

Found them in the gt350r install video, if anyone is interested, they are : W708464-S459B M6x15 bolts... nice short name

2.50 a pop at factorypartsgink.com ... plus 8 shipping.

 

[11GT50]

I have a number of them ground nearly flat from a dip coming out of a turn at my local track. I installed the ZL1 Addons splitter protectors last year and several of those are getting worn down too. I suppose I could avoid the dip, but where's the fun in that?

 

[Shift]

I'm pretty sure mine are rivets by now.

 

[Voodoo Velocity]

try fastening athletic cups along the underside of the spiltter.... *ducking*

 

[460Fred]

try fastening athletic cups along the underside of the spiltter.... *ducking*

Now that’s funny right there.
I was laughing the moment I saw the OP’s thread title.
Some of are not right in the head.

 

[Rose City R]

I hate it when I scrape my nuts.

 

[Tomster]

Do you mean the rivets? If so, I have the part numbers

 

[rick81721]

I have a number of them ground nearly flat from a dip coming out of a turn at my local track. I installed the ZL1 Addons splitter protectors last year and several of those are getting worn down too. I suppose I could avoid the dip, but where's the fun in that?

mine are ground flat too after almost 3 years of going in and out of a too steep driveway. And now the splitter has a little split in it. will be a fun project to replace it!

 

[JAJ]

I have a number of them ground nearly flat from a dip coming out of a turn at my local track. I installed the ZL1 Addons splitter protectors last year and several of those are getting worn down too. I suppose I could avoid the dip, but where's the fun in that?

Turn 7?

 

[DrumReaper]

Do you mean the rivets? If so, I have the part numbers

How’s that sauce?

 

[Tomster]

How’s that sauce?

Excellent. It isn't cheap, but I've never had a better sauce out of a jar. I'll even go out on a limb and say its some of the better sauce I've had. Get the arrabbiata. Its not spicy like it sounds. Its exactly as described on the label. The "gravy" they make isn't so great.

 

[DrumReaper]

Excellent. It isn't cheap, but I've never had a better sauce out of a jar. I'll even go out on a limb and say its some of the better sauce I've had. Get the arrabbiata. Its not spicy like it sounds. Its exactly as described on the label. The "gravy" they make isn't so great.

It looks good. I may have to do a local search to get some to try. Thanks

 

[11GT50]

Turn 7?

That would be the one.

 

[drummerboy]

Sorry, the sauce sounds much more interesting than the scraping.

Excellent. It isn't cheap, but I've never had a better sauce out of a jar. I'll even go out on a limb and say its some of the better sauce I've had. Get the arrabbiata. Its not spicy like it sounds. Its exactly as described on the label. The "gravy" they make isn't so great.

What do you put it on?

Sponsored