Hwangmihee
Well-Known Member
- Thread starter
- #1
=
Sponsored
Last edited:
There's folks here that can help you, but they will need more information. Wheel brand and model, offset (ET), backspacing, and what brakes you have (Performance Pack etc.)?Hello guys and gals,
Anyone here running 19x10 with spacers up front? There's no information if I can put a 10mm spacer up front on a 10in wide wheel without clearance issues (magneride and Steeda 1in lowering springs) or needing to change wheel stud lengths. The spacer im thinking of running are just the non hubcentric ones rather than non hubcentric.
There information missing from your post to answer your question - primarily - what offset the wheel it ? I assume you're worried about fender clearance and want to use slip on spacers ?Hello guys and gals,
Anyone here running 19x10 with spacers up front? There's no information if I can put a 10mm spacer up front on a 10in wide wheel without clearance issues (magneride and Steeda 1in lowering springs) or needing to change wheel stud lengths. The spacer im thinking of running are just the non hubcentric ones rather than non hubcentric.
ET 35-40 is fine as-is or if 40, run a 3-5mm spacer if you want. Other than that it's time for extended studs.19x10 with spacers up front?
Or buy wheels with the proper offset in the first place.ET 35-40 is fine as-is or if 40, run a 3-5mm spacer if you want. Other than that it's time for extended studs.
flow-formed wheels at $1000 each?It's 19x10 Advan GT ET35 all around
Those will fit with plenty of room, no need for a spacer.Hello guys, sorry about the missing info.
It's 19x10 Advan GT ET35 all around. They didn't have the fronts in a different size for me as I got them new for really cheap.