Thanks man .. so I've been working on another creation and was able to get the 15-17 cover to fit ..just need to make adapter plates
They just didn't try hard enough
Best guess: (a) mute the DI sounds as much as possible (b) more people like change than hate it.
Keep it!! so you don't hear that rattle
@Elvis66 You're work is inspiring! Spent some time yesterday trying to retro fit those valve coil covers. I see you had to cut some holes in the coil covers to make them fit.Yes they are .. version #2
Hey what's going on man thank you very much for the positive feedback... So you will definitely have to do some modification work to the d I pump.. you have to take the bracket that holds the insulation off ..I had to disconnect the wiring harness that goes to it and flip it down so would have more clearance with the coil cover .also it will be a tight fit and the coil cover will be up against the insulation on the firewall but it doesn't look bad... As for the driver side to make it fit more properly you will have to cut an extra hole in the cover.for the crankcase tube.there's really no way to make them fit perfectly like they would on the 15 through 17 but they still look very nice and clean up the engine bay.I've also been working on a 15 through 17 manifold cover that I was able to get fit as well so I will have a third option for the third gen coyote as well using these coil covers.
how much would you charge to make me one of these with a race red and carbon fiber look, I have an oxford white with show stopper red interior and I think that would look pretty good to spice up the engine bay?Been working on a few projects that involves dressing up the engine bays for the 18/19 .
Brandon hasn’t posted since last June. Send him a PM if you want to try and reach him.
I'm here if anyone has questions or needs help or interest on the engine cover .
I hate Palmdale road ,Horrible two lane .I think the gloss black coolant tank would look the best with the direction you are going .I changed out my stock engine cover for the much smaller Bullit style covers. Mainly so I could get to the friggin' dip stick, and I wanted to see more of the intake runners. They are plain black molded plastic, no detail at all to them. You've inspired me to do them up. Race Red with black lettering to go with my color scheme. I like the yellow coolant tank on yours. I'm not sure if RR would work in my mind/taste, red/black theme again. I guess try it plain black anodized, then I could always paint it RR.
Nice work by the way. I use to live in the "High Desert" back in the '80's when Palmdale was a boom town. I hated the drive to the Valley everyday, one of the reasons I left.
