What did you do to your S550 Mustang today?!

[Joelang33]

Received my metallic red Ashiko big bore weighted knob from Raceseng! going to pick up some Loctite and install tonight!

Sponsored

 

[Voo Doo]

Received my metallic red Ashiko big bore weighted knob from Raceseng! going to pick up some Loctite and install tonight!

Make sure the reverse lock ring works freely!! BEFORE THE LOCTITE DRIES !!

I tightened mine one revolution too much...took about 6 months of prying it back down before it loosened up to normal!!

 

[Joelang33]

Make sure the reverse lock ring works freely!! BEFORE THE LOCTITE DRIES !!

I tightened mine one revolution too much...took about 6 months of prying it back down before it loosened up to normal!!

It came with a black adapter with a silver piece at the top. does that silver piece need adjusted or is it correct out of the box? to use the reverse lock ring

 

[JKL1031]

finished the H pipe install today. i was skeptical in the midst of all the work, but it was worth it. Really wasnt that bad, I just did it all by myself on ramps.

 

[Anthony 05 GT]

Took the S550 to Costco, came home and pulled the Blown/stroked '05 into the lift bay for a rear main seal in the morning. Gonna have to light the woodstove in the am.

 

[Endokendal]

Installed my DCTMS steering wheel! Love the feel of the leather and thicker feel of the wheel. Thanks to 50 Deep for organizing the group buy and discount!:clap2::cheers:

 

[gameovergt]

Ordered Steeda IRS braces.

 

[gameovergt]

Installed my DCTMS steering wheel! Love the feel of the leather and thicker feel of the wheel. Thanks to 50 Deep for organizing the group buy and discount!:clap2::cheers:

Hows the install?

 

[FranzVonHoffer]

Installed my DCTMS steering wheel! Love the feel of the leather and thicker feel of the wheel. Thanks to 50 Deep for organizing the group buy and discount!:clap2::cheers:

That's one of the nicer aftermarket wheels I've seen. Very nice.

 

[tj@steeda]

Ordered Steeda IRS braces.

Nice review & install video to help you from our friends at LMR:

[ame]

Best Regards,
TJ

 

[Dare2goBare]

Picked theses MMD Strut Covers up today, going to spray them Silver with a clearcoat to match the Twr Brace, may paint the Pony RR.

 

[Weasel1]

Installed the JLT oil seperator and pulled the fuse box cover. Gonna prime it and paint it Grabber Blue.

 

[z06psi]

Picked theses MMD Strut Covers up today, going to spray them Silver with a clearcoat to match the Twr Brace, may paint the Pony RR.

I would love some of those but they want to charge me $48 in shipping and they stopped answering all PMs here.


Kind of hard to support them now.

 

[Endokendal]

Hows the install?

Had to buy a 24 mm socket and an impact drill for the main bolt holding the wheel to the drive shaft, but it was very easy after that (wanted the impact drill anyway... I’m sue you could do it with a big wrench). You also need a 20 torx head screwdriver. Took about an hour total taking my time. Nothing very complicated about it... watch the CJPP video though to see how to stick a thin screwdriver in and unlatch the airbag on both sides. I probably wouldn’t have figured out how to do that without the video.

Sponsored