10.2" Horizontal display Android 4.4.2 touch screen radio

[firestarter2]

I'm the one that found out that if I unlock and move the AT shift lever forward slightly until the R goes out on the center information display the camera un-zooms. The other day I discovered that the back up light under the bumper also goes out.

I just haven't had time to study the factory wiring diagrams to try and figure out what is going on. If I can limit the signal to the Secaine unit to come from the automatic transmission gear shifter only and not get another signal from the backup light maybe the camera would stay wide angle.

Maybe as someone said the light causes a voltage drop.. curious what would happen if you remove the bulb.

Sponsored

 

[5.0_SD]

Glad to see you back jpr...something wonky there in the wiring. I wish I had diagrams to look at to try and help with this.

That would be a pretty easy check to do I would think firestarter...can you try that jpr?

 

[PatrickHenninger]

HUGE NEWS COMING LATER THIS MORNING!!!!!

 

[PatrickHenninger]

This is for the 10.2" Group buy

CPU: Cortex A53,64-Bit, Quad core,1.5GHz
ROM: 32GB Inand flash
RAM: 2G DDR3
Operation system: Android 6.2.0
Language: Support multiple language
Memory card / USB: Micro-SD (Support up to 32GB)
Display Screen: 10.2 inch, 1024*600 pixels
Touch Screen: Multi-touch Capacitive screen
WiFi: WIFI:IEEE802.11b/g/n wireless network
Navigation software: IGO, navitel, Sygic etc
Radio: ST7786(AM: 522-1620 KHz, FM: 65-108 MHz ) RDS
TV: Build-in Analog (Optional), Digital TV(DVB-T,ISDB-T,DVBT2)(
Optional)
Video: AVI(H.264, DIVX, XVID), RM, RMVB, MKV, WMV, MOV,
MP4(H.264, MPEG, DIVX, XVID), MPEG, MPG, FLV. HD 720P max.
Audio: MP3,WMA,MP2,OGG,AAC,M4A,MA4,FLAC,APE,WAV
Bluetooth: A2DP and Bluetooth OBD
Steering Wheel control: Support
Rear view camera: Support
4G:TD-SCDMA,FDD-LT,TD-LTE(optional)
Siri: Support
GPS: Support
DVR: Support( Contact External DVR)
Ipod: Support Audio (Optional)
OS Update: SD update
APP Update: SD update
DSP: Support
Game: Support
DVR: Support
Dynamic Wallpaper: Support
3-Band Equalizer: Support
Phone Book: Support
Max Current: 10A
Subwoofer: 0.8V
Working Voltage; 12V
Operate Volt Range: 10.8V - 16V
Working Temperature: - 20°C to + 70°C
Output: 4 x 45W(TDA7388) built-in amplifier
Anti shock: Mechanical anti-shock & Electronic anti-shock
Mirror Link: Support(Android System and IOS System Mobile) USB/WIFI
Connect
I/O Port: Manual book x 1, Power Connector x 1, GPS Antenna x 1

I have highlighted the important details in bold.

Oh, I should probably mention that the pricing is $250USD each! (I'm waiting on confirmation that this will include shipping)

 

[5.0_SD]

$250 :eyebulge::eyebulge::eyebulge::clap2:
Oh ya..still in!!:cheers:

 

[PatrickHenninger]

$250 :eyebulge::eyebulge::eyebulge::clap2:
Oh ya..still in!!:cheers:

...and twice the hardware!

 

[firestarter2]

Hmm at 250 id probably be in again *sigh* My unit does NOT have a SD card slot.

Can you find out what DVR they use?

 

[[email protected]]

U DA MAN!

now shut up and take my money!

 

[PatrickHenninger]

Hmm at 250 id probably be in again *sigh* My unit does NOT have a SD card slot.

Can you find out what DVR they use?

It would be a USB DVR, similar to this:

https://www.amazon.com/Camera-Degree-Viewing-Android-Navigation/dp/B01KXJ1KPQ

 

[[email protected]]

i forget, these have low level outputs for amplifier connections right?

 

[PatrickHenninger]

i forget, these have low level outputs for amplifier connections right?

Not sure, you'd have to ask someone who already has one. The specs list "Subwoofer: 0.8V" but that doesn't tell me there are RCA outs.

 

[firestarter2]

i forget, these have low level outputs for amplifier connections right?

Yes it does. I have not tried them

 

[[email protected]]

Another thing I did was cover all the wires on the Secaine wiring harness with split loom tubing and secured it with cable ties at each end. There are a lot of sharp edges on the metal supports under the dash. I didn't want to take a chance on a cut through the wire insulation and having a short circuit.

I also put plastic caps on the 15 RCA jacks that I didn't use. Again, I didn't want any short circuits. I bought the thread protector caps from MOCAP off internet. They are the RVCC9022-20 black round vinyl 7/16 (.437) inside diameter x 1-inch long. I had to buy 100 of them for $28 so I have some left over for other projects.

Here's a picture of my harness:

looks like the low level outputs are in the harness?

 

[5.0_SD]

If it's like the Seicane, there is a harness they show for RCA's.

 

[[email protected]]

That's good. I truly only need one set right now for the sub amp.

Sponsored