paxton2200SL/bap on e85 questions

[pwnall1337]

Hey guys,

In march I wanted to go with a paxton 2200SL to make around 800 whp on e85.
I'll be running id1000's and this would most likely be a beefcake special.

How far can the vortech BAP take me? I feel like it'll be much safer with fore stage 2 e85 fuel system ($1800), however that's a lot of dough.

Also, with the ati damper included in the beefcake opg/tg set, what size pulley would get me to 800 whp and how much boost would that be?

Thanks!

Sponsored

 

[Jeff_oddo]

I would highly recommend a return style fuel system to support your horsepower goals... you will be on borrowed time with the BAP and E85 at that level...

 

[Yellow]

You need a fuel system to support 800 rwhp on E85. I have 3.48 pulley in my paxton on E85 and I'm making 790rwhp with Ken@Palm Beach Dyno tune.

 

[OXFORDS550GT]

You need a fuel system to support 800 rwhp on E85. I have 3.48 pulley in my paxton on E85 and I'm making 790rwhp with Ken@Palm Beach Dyno tune.

Do you mind if i PM you regarding your setup?

 

[DrDane]

Do you mind if i PM you regarding your setup?

Me 2?

 

[Slamdcoop0428]

I have a 3.48 also. You will need a 3.33 pulley for 800+whp

 

[DrDane]

How much boost are you getting on 3.48? I have a 3.33, but its 6 rib :(

 

[Slamdcoop0428]

I make about 14 psi and im on the 6rib setup also. With the 3.6 pulley i made 12.5 and went 9.64

 

[DrDane]

I make about 14 psi and im on the 6rib setup also. With the 3.6 pulley i made 12.5 and went 9.64

Wasn't the 680 before you pullied down? (i.e. the 3.6 and ~12lbs)(and on a mustang)

What have you run since?

 

[Azmike]

Go with a 3.6 pulley and do an aTI overdrive damper and fuel system, i see 17 lbs at peak!

 

[Need4Speed15]

Hey guys,

In march I wanted to go with a paxton 2200SL to make around 800 whp on e85.
I'll be running id1000's and this would most likely be a beefcake special.

How far can the vortech BAP take me? I feel like it'll be much safer with fore stage 2 e85 fuel system ($1800), however that's a lot of dough.

I don't believe any tuner is gonna tune to 800rwhp with a BAP on E85. I know Lund won't.

Look into the Sai Li return system. It's $950 and will support your goal. Search this forum there is info on the system as well as installation tips and tricks.

 

[Slamdcoop0428]

Wasn't the 680 before you pullied down? (i.e. the 3.6 and ~12lbs)(and on a mustang)

What have you run since?

Yes it was. I also run c85 now at the track with the 3.48. The car is faster just haven't got a nice day down here in florida. Its hot as hell. I also haven't been back to a dyno to see what its making.

 

[Slamdcoop0428]

Go with a 3.6 pulley and do an aTI overdrive damper and fuel system, i see 17 lbs at peak!

Get some Better clamps. Dont want your couplers blowing off.... Lol

What have you run or made on 17psi?

 

[Jay159866]

800whp with a BAP on E85.. I wouldn't risk that, get Sai's Kit. The link to the instructions are in my signature.

 

[pwnall1337]

This thread is old. I'm doing TBR stage 1 fuel system.

Sponsored