how many blower guys did install yourself?

[StoplightWarrior]

I think I could handle the Procharger by myself, but the roush looks like it could be a challenge. Whipple also seems like it is kinda hard...

Did most of you take your GTs to a shop for install, or did it yourself in your own garage? :cheers:

Sponsored

 

[whatsup62]

Just finished up my PC install tonight. In POS garage with basic hand tools. All good!

 

[Super Werty]

Did my Whipple in my garage. My biggest issue was august heat in Arizona. I lost a lot of water weight haha

 

[db252]

Did my Whipple install myself and would not consider it hard; just time consuming but enjoyable. Plenty of us on here to help regardless what you buy.

 

[isedawishy]

Installed the Vortech myself. I'd recommend installing it yourself to learn how it all works.

It'll help you diagnose any issues later like intercooler piping coming loose, etc.

 

[StoplightWarrior]

what if anything is the most challenging part of the whipple install?

 

[r1lovin]

Did the pc install in my garage. Very easy, Basic hand tools only.

 

[StoplightWarrior]

Does the Procharger make a nice sound? I had a Vortech on my old Mustang and it was kinda quiet.

I really like the idea of the Procharger, but it's not smog legal here in CA

 

[r1lovin]

Does the Procharger make a nice sound? I had a Vortech on my old Mustang and it was kinda quiet.

I really like the idea of the Procharger, but it's not smog legal here in CA

The standard gears are loud. I love it!

 

[Obsol3te]

KB Install in my garage with a couple of basic tools.

 

[5.0 Steve]

Whipple here easy install

 

[TheHydro]

I did the Whipple in my garage and it wasn't hard, just time consuming. The hardest part was setting the manifold and blower on. Well that part wasn't hard but I had to have someone help and I was very careful to set it straight down so the o rings did not pop out.

 

[Evo_Rob]

what if anything is the most challenging part of the whipple install?

I did my own Whipple install. The worst part is pulling off the front bumper due to the 2 fender bolts. Everything else was easy

 

[JohnG]

Paxton install in my garage. Just take your time with it.

 

[sonic]

I did my Whipple Not 1 issue car runs perfect and looks factory.

Sponsored