Work Meisters S1 3P

[Snooty]

Hey guys first ever post on the forum!

Recently picked up my first mustang and first ever brand new car the other week. (I’ll make a new car thread later)
As the title says I am pretty keen to get a set of work Meisters on my car, I don’t think I’ve ever seen a set out on a stock body mustang. I was wondering if anyone on here has done it or if any of the experienced dealers on here know if they will fit over the brembo brakes?

To go on this car....

Sponsored

 

[Meraki Autoworks]

Hey,

We can try to help you out, we haven't done it on a Mustang but we've done it on every other JDM car out there. Feel free to message or email me.

-Josh

 

[80FoxCoupe]

That would be sick, such an awesome wheel!

 

[Snooty]

Hey,

We can try to help you out, we haven't done it on a Mustang but we've done it on every other JDM car out there. Feel free to message or email me.

-Josh

Cheers Josh! PM sent

 

[URSLO_G]

Cheers Josh! PM sent

Did you guys every figure this out. I have been struggling to get info for this setup?
I have a 2017 Ford Mustang gt base on air and wanna have this wheel on mine

 

[Snooty]

Did you guys every figure this out. I have been struggling to get info for this setup?
I have a 2017 Ford Mustang gt base on air and wanna have this wheel on mine

Zombie thread thread but figure I would at least answer the question!
My order specs in the end were:
M14 bolt, 20x10 +38
20x11 +45

I have loved the wheels but I did go with the CR2P in the end. Years later i find myself now wanting to go proper 3 piece meisters. I would like to do 19’s but I have no idea still if they would clear the brakes. I’d probably have to take measurements and send them to my wheel shop for order. Otherwise I would just order similar specs S above but more aggressive front offset, likely a +33 or so.

If I order a different set I’d want something different. I like striking cars inspired by JDM car styling. I’ll post some examples, wish I had photoshop to mock up so I could see what would look good in my car:

thoughts?

 

[RowdyRam]

Zombie thread thread but figure I would at least answer the question!
My order specs in the end were:
M14 bolt, 20x10 +38
20x11 +45

I have loved the wheels but I did go with the CR2P in the end. Years later i find myself now wanting to go proper 3 piece meisters. I would like to do 19’s but I have no idea still if they would clear the brakes. I’d probably have to take measurements and send them to my wheel shop for order. Otherwise I would just order similar specs S above but more aggressive front offset, likely a +33 or so.

If I order a different set I’d want something different. I like striking cars inspired by JDM car styling. I’ll post some examples, wish I had photoshop to mock up so I could see what would look good in my car:

thoughts?

Snipped a few pics out to opine that the two tone black and bronze-ish (or is that black chrome?) would look killer on your ride. The black ones are way cool, don't get me wrong, but there's something about the two tone - and on a red car it'd be striking for sure.

 

[80FoxCoupe]

Zombie thread thread but figure I would at least answer the question!
My order specs in the end were:
M14 bolt, 20x10 +38
20x11 +45

I have loved the wheels but I did go with the CR2P in the end. Years later i find myself now wanting to go proper 3 piece meisters. I would like to do 19’s but I have no idea still if they would clear the brakes. I’d probably have to take measurements and send them to my wheel shop for order. Otherwise I would just order similar specs S above but more aggressive front offset, likely a +33 or so.

If I order a different set I’d want something different. I like striking cars inspired by JDM car styling. I’ll post some examples, wish I had photoshop to mock up so I could see what would look good in my car:

thoughts?

Black/bronze lip meisters would be awesome on your red s550....

 

[Snooty]

Snipped a few pics out to opine that the two tone black and bronze-ish (or is that black chrome?) would look killer on your ride. The black ones are way cool, don't get me wrong, but there's something about the two tone - and on a red car it'd be striking for sure.

It is the gloss bronze in that first pic!
I want 19’s so i can run a meatier set up. Something like a
19x10 295/35/19
19x11 305/35/19
Gonna gave to fill out this form they sent over so I can clear the brakes…

If anyone already has the dimensions help a brother out.. otherwise it will be wheel off and tape measuring time for me!

 

[Snooty]

Black/bronze lip meisters would be awesome on your red s550....

It will be phase 2 of the car! Started off red and silver/polished….a bit old school….

then meisters + cowl hood and a max effort NA motor.
The black and bronze is easily the most unique. Gold riv nuts!

 

[Snooty]

Alright after a lot of measurements back and forth, to save anyone in the future who wants to do meisters let me save you a lot of pain.
19's will not fit unless you are happy to run a big spacer.

20's will fit with the biggest brake clearance disk being the R disk on the front, with about 2.3mm clearance. I will run a 2mm spacer just to be sure.

The rears you can run the most aggressive dish with an O disk and still clear the factory rear caliper no problem. (only tested the rear with 20" measurements)

 

[Snooty]

Again for anyone who wants to know in the future.

Work Meisters in 20x10 R disk can only be made in +25 or +38 (at least for offsets that suit mustangs.)

I will measure again to confirm how much clearance I am getting between the wheel and the back of the caliper.

My ultimate sizings will probably be:

20x10 +25 R disk 285/30/20 (unsure if a 295/30 will rub) this will have a 73mm dish
20x11 +44 A disk 305/30/20 (should be identical in poke/fitment to the the front) this will have a 85mm dish

If I went with a +42 offset and O-disk on the rear I would get 98mm dish, which is heeeectic, however +42 with a 305/30 might be a little too much. As hotboy as these wheels and specs are, I prefer function over form.

Car is currently on stock magneride springs, it will be lowered once I get a property that will allow it. I know if lowered it would help tuck the wheels somewhat.

Anyone running something that aggressive?

 

[NightmareMoon]

People run 11s ET26 front (with healthy camber) so your front being only a 10” isnt crazy aggressive.

An 11” ET44 rear will poke slightly so you are gonna need a lot of camber, which you can get with a rear wheel alignment. A 48 would be aggressively flush with decent camber and a 50 or 52 is the ‘normal’ offset for a an 11” rear.

 

[Snooty]

People run 11s ET26 front (with healthy camber) so your front being only a 10” isnt crazy aggressive.

An 11” ET44 rear will poke slightly so you are gonna need a lot of camber, which you can get with a rear wheel alignment. A 48 would be aggressively flush with decent camber and a 50 or 52 is the ‘normal’ offset for a an 11” rear.

That’s good to know for the fronts. I currently have a +45 rear so 1 more mm won’t be a worry.
Im currently 285/30/20 front and 305/30/20 rear. Wouldn’t mind 295 front.

I’ve recently seen on here though how many people run a 35 profile tyre with 20” wheels. Seems pretty tall but also does look fat.

 

[Snooty]

For those following along,

I did indeed finally place my order!! They will be a custom 1 on 1 set, unsure if Work have ever made this exact spec Meister before.

20x10 +25 front
20x11 +44 rear

BKB (burning black) centre disk finish (custom colour order, sometimes turns out darker gun metal like, sometimes turns out more chromey, absolute $730aud roll of the dice on that one)
Gloss black lips
Chrome rivets
White Work logo

Estimated 4-5 months delivery time (however Work wheels in the past have come much sooner than the estimate)

Now just deciding on rubber...between MP4s which I have now and have not disappointed or maybe continue with the JDM theme and go some Advan AD09's

Probably go 275/35 front and 295/35 rear to accommodate the very aggressive offsets.
Made these up with A.I to get an idea of what they will look like because I cannot find an example anywhere.

Sponsored