UPR vs Ford Performance Catch Cans/Oil Separators

[FPCV8YO]

Where is everyone getting these, best price OTD ?
Agree, go with oem Ford, in case you blow a engine or others issues,
like oil usage, etc. It seems wiser to have the oem there....

Yes, we all know that the law protects us and manufacturer has to
prove what you put on there is the cause of failure, if they deny you,
but do you want to go through that ?

http://www.mustang6g.com/forums/showpost.php?p=1571326&postcount=2

Sponsored

 

[Bcobb85]

I purchased mine from here... http://parts.autonationfordwhitebearlake.com/ HUGE thank you to Mach4.6 who PM'ed me the link. Got both cans for $288.51 shipped (137.50 each)!

 

[UPRSteve]

Can you provide a link to the upgrades hoses for the FRPP catch cans? Do you offer the upgraded hoses for both sides?

http://www.uprproducts.com/mustang-pro-series-hose-upgrade-ford-racing-separator-11.html

I can't judge the FRPP system but can confirm that the UPR system is very easy to install and looks and feels very high quality made. I have just installed it this weekend so I can't give any information yet on draining the system but again, based on the info I got from UPR, this should be straight forward.

Very straight forward. We have seen 3-6 ounces picked up every 3k miles without thinking about it. And the exit portion of the can will be dry.



One thing we 100% stand behind is the work that we put into our single valve catch can system. We are the only one with a 4 chambered design that we PATENT. While behind able to hold the most oil, we have seen fuel and moisture being trapped in it. The check valve was test to ensure a tight seal and keep the motor vacuum system running the way Ford designed it. We also created the Clean Side Separator for the driver side you will only get oil splashing back into the intake tube.

With our kit. it's more than just a name stamped on it. it's a system that has countless of hours to ensure the best fitting and sealing while offering non-restrictive flowing kit. The exit portion of the can is just as important as the inlet. This way you know nothing is getting back into the engine.

 

[ShadowBlackR]

Thanks for the link. Looks good. Do you offer (or have in the works) the hoses for the drivers side?

 

[torque124]

I have a brand new, drivers side for sale for 100 bucks + postage. OEM ford performance.

 

[Trackaholic]

I bought the UPR kit because the FP kit was not available when I got my car.

IMO the UPR kit is higher quality with better mounting than the FP kit, but the FP kit is also very nice.

My passenger side can gets full very quickly, but is also easy to drain. Haven't seen anything in the driver's side baffle.

-T

 

[UPRSteve]

Thanks for the link. Looks good. Do you offer (or have in the works) the hoses for the drivers side?

Yes. Its a Pro Series hose ugrade which goes for $39.99 P/N: 5042-09

I bought the UPR kit because the FP kit was not available when I got my car.

IMO the UPR kit is higher quality with better mounting than the FP kit, but the FP kit is also very nice.

My passenger side can gets full very quickly, but is also easy to drain. Haven't seen anything in the driver's side baffle.

-T

Awersome! Thank you. The Driver side shouldn't as its designed to literally separator the air and oil and not let anything past the built-in difusser. The Routing will only allow air.

 

[FPCV8YO]

Yes. Its a Pro Series hose ugrade which goes for $39.99 P/N: 5042-09



Awersome! Thank you. The Driver side shouldn't as its designed to literally separator the air and oil and not let anything past the built-in difusser. The Routing will only allow air.

Please provide a link for the 5042-09.

 

[ShadowBlackR]

Took me a minute to find but it's here. Use the drop down to find the "-09". It does look like it's just 1 hose (to replace the stock hose) and not the 2 hoses you would need.
I'm still confused.
http://www.uprproducts.com/mustang-pro-series-hose-11.html

 

[UPRSteve]

Took me a minute to find but it's here. Use the drop down to find the "-09". It does look like it's just 1 hose (to replace the stock hose) and not the 2 hoses you would need.
I'm still confused.
http://www.uprproducts.com/mustang-pro-series-hose-11.html

If your looking for the hose upgrade for the FRPP system, I posted that a few post above. But here it is again.


http://www.uprproducts.com/mustang-pro-series-hose-upgrade-ford-racing-separator-11.html

 

[ShadowBlackR]

Yes sir, I've looked at that - your Item # 5042-159. That appears to be the 2 upgraded hoses for the passenger side with the FRPP system. Your image only shows the passenger side (2 hoses). Are there 4 hoses in the kit and you are not showing the drivers side? I have the FRPP system on both sides and I'm looking for the upgraded hoses for the drivers side also. Your 5042-09 looks like it is just the 1 hose upgrade for stock (no FRPP catch can). Do you offer the upgraded hose kit for the drivers side (2 hoses). If I'm missing something I apologize. I don't know how to ask the question any other way. Thanks

 

[UPRSteve]

Yes sir, I've looked at that - your Item # 5042-159. That appears to be the 2 upgraded hoses for the passenger side with the FRPP system. Your image only shows the passenger side (2 hoses). Are there 4 hoses in the kit and you are not showing the drivers side? I have the FRPP system on both sides and I'm looking for the upgraded hoses for the drivers side also. Your 5042-09 looks like it is just the 1 hose upgrade for stock (no FRPP catch can). Do you offer the upgraded hose kit for the drivers side (2 hoses). If I'm missing something I apologize. I don't know how to ask the question any other way. Thanks

The hose upgrade for the FRPP system only comes wiht 2 lines. The driver side line us 5042-09 which comes with the hose and quick connect fittings for the intake tube and valve cover.

If you want, you can call us at 561-588-6630 and we can get this set up for you.

Sponsored