TPMS Reset

[Doctor Fishtail]

I ordered my sensors through need4speed and looking for help resetting. Called their customer support (very good guys) and they told me to check with the Mustang forums. So anybody know how to do this? Search of forum I came up with nothing.

Sponsored

 

[NightmareMoon]

So you are installing new wheels with TPMS sensors? Just drive them around, the computer will figure it out after a while. I think mine took a 10 mile commute or two before the factory computer figured it out.

There really aren't any special steps, just mount 'em up and drive.

 

[Doctor Fishtail]

So you are installing new wheels with TPMS sensors? Just drive them around, the computer will figure it out after a while. I think mine took a 10 mile commute or two before the factory computer figured it out.

There really aren't any special steps, just mount 'em up and drive.

Mine will not. Been driving them 250 miles.

 

[Ultimateone]

So you are installing new wheels with TPMS sensors? Just drive them around, the computer will figure it out after a while. I think mine took a 10 mile commute or two before the factory computer figured it out.

There really aren't any special steps, just mount 'em up and drive.

Mine have TPMS sensors and they never "learned" from NFS as well.

 

[Doctor Fishtail]

Mine have TPMS sensors and they never "learned" from NFS as well.

They charged me $140 I think. Hopefully they can get some that will sync to ECU. I am not sweating this but want them to stop setting off dash board alerts.

 

[NightmareMoon]

Huh, mine registered fine.

 

[zuki_dan]

I had an issue with mine from N4S also. I ended up buying the remote from ebay for like $30 and synced them using the video from CJ pony parts.

I also drove around on mine for about 200 miles and they wouldn't auto sync. Sync'd right up with the remote and the learning procedure though.

 

[scott_0]

are they Ford OE sensors? or a generic brand? Im going to guess they are generic, my Ford OE sensors that came with my wheels from LMR trained right away

 

[Doctor Fishtail]

I had an issue with mine from N4S also. I ended up buying the remote from ebay for like $30 and synced them using the video from CJ pony parts.

I also drove around on mine for about 200 miles and they wouldn't auto sync. Sync'd right up with the remote and the learning procedure though.

Could you post a link from Ebay? Or what term did you search with? N4S TPMS Syncherupper? EDIT: Is this it? http://www.ebay.com/itm/Motorcraft-...ash=item56890eb11d:g:xBAAAOSwR5dXSNaY&vxp=mtr

 

[Cascadia_302]

https://www.amazon.com/Motorcraft-T...id=1468204176&sr=8-5&keywords=tpms+reset+tool

Same part number as the one American Muscle sells

 

[Optimum Performance]

We sell them as well right HERE

Our's includes printed instructions on how to program them.

 

[Quackfoo]

Yeesh, you can buy the Ford OEM sensors on Amazon for $75... $140 is way too much. They're a little cheaper on Ebay.

 

[SmokedSS]

Make sure your tires are inflated to the recommended psi.

2) Turn ignition to the on position. If you have a push button start, push the start button without pressing the brake pedal.

3) Push the hazard light button 6 times. The horn should honk and you should see "Train left front tire" in the LCD display between the tach and speedo.

4) Release air pressure in the front left tire until you hear the horn honk. The LCD display should now read "Train right front tire".

5) Release air pressure in the right front tire until you hear the horn honk.

6) Repeat for the the right rear tire, and then the left rear tire.

7) You should now see "Training Complete" in the LCD display.

8) Fill your tires back up to the recommended pressure.

 

[Doctor Fishtail]

Make sure your tires are inflated to the recommended psi.

2) Turn ignition to the on position. If you have a push button start, push the start button without pressing the brake pedal.

3) Push the hazard light button 6 times. The horn should honk and you should see "Train left front tire" in the LCD display between the tach and speedo.

4) Release air pressure in the front left tire until you hear the horn honk. The LCD display should now read "Train right front tire".

5) Release air pressure in the right front tire until you hear the horn honk.

6) Repeat for the the right rear tire, and then the left rear tire.

7) You should now see "Training Complete" in the LCD display.

8) Fill your tires back up to the recommended pressure.

LOL. Where did you get this from? It sounds like a joke. I do this then comeback and post it did not work. :lol: Joke is on me.

 

[zuki_dan]

Could you post a link from Ebay? Or what term did you search with? N4S TPMS Syncherupper? EDIT: Is this it? http://www.ebay.com/itm/Motorcraft-...ash=item56890eb11d:g:xBAAAOSwR5dXSNaY&vxp=mtr

The one in the link is the correct one. CJ Pony parts did a how to video on how to sync them on the 15+ mustangs also using the remote.

Sponsored