Tire Width Recommendation

[Prodigal]

I have a set of 10.5/11.5 x20” wheels about to arrive. Looking for tire size (width) recommendations. Car is non hp Mach 1 but will have .75” drop Steeda Dual Rate springs and camber plates. and factory Mach 1 wheel lip trim front and rear. Was leaning towards 295 / 315 but I see a lot for folks running 305 up front. Thoughts on 305 / 325 front / rear? Car is not tracked. Looking for flush fit or miniscule poke if unavoidable.

Sponsored

 

[dsiggi]

https://motoiq.com/how-to-properly-select-and-size-tires-for-performance/

 

[NightmareMoon]

Would need to know additional details to advise on what would or would not fit (specifically the front).

 

[EFI]

You're kinda splitting hairs there, you won't notice that much difference between 10mm worth of tire.

For track driving I prefer to go on the narrower side for more direct feel. For the street I prefer to go a bit wider for the meatier look.

 

[Coastal-Mach]

I don't think you will have any issues running the 305 fronts, the HP come with them from the factory, so going 20's should be good, if you stay with a 305/30 VS 305/35. The 325 will fit perfect. Good luck, and post up the new wheels when they arrive.

Sponsored