Thread for 18 inch wheels or less, post them up.

[VIN666]

Yeah... Pic is right side up on the phone, but when i upload it it goes chinese.

Sponsored

 

[JTR]

Bump?

 

[Mustangroolzz]

Need help!!

Hi everyone, I wanted to know if I would be able to run 18×9.75 +25 et with 245/40 all around on my mustang??

 

[VIN666]

Hi everyone, I wanted to know if I would be able to run 18×9.75 +25 et with 245/40 all around on my mustang??

Jup

http://www.willtheyfit.com/index.ph...meter2=18&wheelwidth2=9.75&offset2=25#content

 

[Mustangroolzz]

Jup

http://www.willtheyfit.com/index.ph...meter2=18&wheelwidth2=9.75&offset2=25#content

Thx for the help.

 

[NewSVO]

Jup

http://www.willtheyfit.com/index.ph...meter2=18&wheelwidth2=9.75&offset2=25#content

Can you post more pics of your set-up, I'm intrigued of how it came out.

 

[VIN666]

Next week.
Can't lower the car because i only have about an inch of clearance to the rocker panels in my drive way :(

Time to buy a new house.

 

[Northern Stallion]

Hi guys does anybody know what are the widest tires that can be safely put on to the 18x8 foundry wheels (051A package)? Does anyone have pics of that setup lowered or not?

 

[JTR]

Hi guys does anybody know what are the widest tires that can be safely put on to the 18x8 foundry wheels (051A package)? Does anyone have pics of that setup lowered or not?

Here is mine on sportlines.

 

[Old 5 Oh]

Thanks, man.
It is stock. I'd like to put 255s onto my rims when I wear out my tires though.

I have the same rims and like them, too. But they are only 8" wide, and 255s are too much. They'll be very mushy. Even 245s are better on 9" rims. That was the big compromise for me. I didn't want the larger diameter wheels, but I would have loved a 9" rim.

 

[IvanCRF]

I have the same rims and like them, too. But they are only 8" wide, and 255s are too much. They'll be very mushy. Even 245s are better on 9" rims. That was the big compromise for me. I didn't want the larger diameter wheels, but I would have loved a 9" rim.

I love our rim's design. FATHERFORD posted some of his factory rims being widened to 12''. Our foundry ones would be sweet widened several inches, but they'd be near 30 lbs :frusty:

 

[LStillman]

So would 18x10.5 +35 with a 275 or 285 tire work then? Is there enough clearance with the struts to go inward some?

 

[MrWolf]

As soon as i receive my car (a little while yet), I'm going to see if I can get away with 18 x 12 rims with some 345/35s out back (probably with some small mod using relocation brackets on the rear shocks as recommended by Fartherford).

Sent from my GT-I9000 using Tapatalk 2

 

[Northern Stallion]

Newb questions:
I'm thinking of getting wheel spacers for a more aggressive look, i have the 18x8 foundry wheels with 235's. Would 5/16 wheel spacers do the job? (I'll probably need wider wheels/ tires 5/16 is just over 1/4 inch)
Does anybody have pics of such a setup?

 

[shanethealmighty]

I am really happy with my 18 inch square setup. Thank god Ford thought ahead and didn't put a fender lip in the rear! I have a base GT with the 3.55 rear axle. With the new wheels, it performed great at the track a couple weeks ago!

Vordoven Forme 9s
18x9.5et34

Nitto 555s
275x40r18

[ame]

Sponsored