PaddyPrix
Well-Known Member
- Joined
- Sep 29, 2019
- Threads
- 13
- Messages
- 669
- Reaction score
- 853
- Location
- San Diego
- Website
- www.youtube.com
- First Name
- Patrick
- Vehicle(s)
- 07 335is, 08 LR2, 13 Tahoe, 18 Mustang GT x2
- Vehicle Showcase
- 2
- Thread starter
- #46
Got some new front hubs with extended hubs and spacers this weekend, one of the last parts that I was waiting on.
Removed the old hubs, put in the new ones, swapped the stock brake rotors and calipers out, put the 6 piston PP Brembos in, put on the AP racing rotors, 27mm spacer, and swapped the stock swaybar out for the FRPP one that was in the track pack.
Tossed on the Apex EC-7 with the 315's for a test fit, looks good, perhaps a little poke.
You can also see where I was testing out some Oxford White touchup spray on the body, looks pretty close with just one pass and no real paint prep, so I'll probably take it to the stock 5.0 replacement fenders I've got and toss them on too, since they're an unpainted black.
Removed the old hubs, put in the new ones, swapped the stock brake rotors and calipers out, put the 6 piston PP Brembos in, put on the AP racing rotors, 27mm spacer, and swapped the stock swaybar out for the FRPP one that was in the track pack.
Tossed on the Apex EC-7 with the 315's for a test fit, looks good, perhaps a little poke.
You can also see where I was testing out some Oxford White touchup spray on the body, looks pretty close with just one pass and no real paint prep, so I'll probably take it to the stock 5.0 replacement fenders I've got and toss them on too, since they're an unpainted black.
Sponsored