Sun Visor Covers for Warning Labels

[Fishtales]

Curious if folks out there have found a cover set that covers the labels and matches the color and material on the sun visors. I don't like looking at them and find them a distraction when the visors are in use.

Sponsored

 

[Rock50]

One of the forum members on here sells these: https://stickyzombie.storenvy.com/products/26116629-warning-label-covers.

 

[traxiii]

Curious if folks out there have found a cover set that covers the labels and matches the color and material on the sun visors. I don't like looking at them and find them a distraction when the visors are in use.

My wife told me that someone in our club found some slip one ones. She hasn't let me know the details yet, but if I get them, I'll post them.

 

[Nightmonkey]

Maybe this is something for you, if you don't need HomeLink: https://www.mustang6g.com/forums/th...n-visors-without-stickers.175559/post-3556436

For HomeLink some DIY would serve you demand, because it seems to be possible to strip down a sunvisor to its components without breaking something.

 

[dirtwarrior]

very cool

 

[Park]

Ordered here

 

[Crew4991]

I am pretty sure the labels can be removed with a hair dryer. The adhesive needs to be heated up and then you can start to pull off the warning label. I personally would go the cover route to support our fellow mustang member that sells these.

https://stickyzombie.storenvy.com/products/26116629-warning-label-covers

 

[aham23]

the yellow visor decals are so horrific. i have covered them up in all of my cars. being a taller guy i literally cant stop looking at them. lol.

 

[Nightmonkey]

I am pretty sure the labels can be removed with a hair dryer. The adhesive needs to be heated up and then you can start to pull off the warning label.

Unfortunately, residues of the glue remain in the fabric, and I don't know of any way to remove them without seeing something afterwards.

As I said, there are the sun visors completely without stickers from EU-RHD driver side and EU-LHD driver side.
Only HomeLink must then be installed in there.

 

[Fishtales]

One of the forum members on here sells these: https://stickyzombie.storenvy.com/products/26116629-warning-label-covers.

Thanks. Ordered them.

 

[Nightmonkey]

For HomeLink some DIY would serve you demand, because it seems to be possible to strip down a sunvisor to its components without breaking something.

I put the EU skin on a US Homelink sun visor after it was clear that the Homelink would work with my door operator.

 

[adeuel]

I've removed every one of these stickers from every BMW I've owned using Goof Off or Goo Gone.
Soak a shop rag with it, and press it on the sticker for a while.
Eventually it will start to wrinkle and come off.
I haven't compared the Ford version yet, but must be similar.

 

[WD Pro]

I've removed every one of these stickers from every BMW I've owned using Goof Off or Goo Gone.
Soak a shop rag with it, and press it on the sticker for a while.
Eventually it will start to wrinkle and come off.
I haven't compared the Ford version yet, but must be similar.

Goo Gone works well on the labels that are applied to the fabric - it will (given time and patience) also remove all the glue from the fabric.

It won’t touch the print that’s on the plastic mirror door.

Note that my experience is based on doing the removal in a cool country, and in the first six months of ownership i .e. trying to get a three year old label of a sun baked Florida / Texas car may not be a comparable experience

WD

 

[Snakebyte]

I purchased/installed vinyl label covers in August 2020, and they worked well for about 2 years. Because they started peeling at the corners I removed them and applied (sprayed) a plastic/vinyl compatible flat-black paint to the labels.

 

[Nightmonkey]

That's like putting a potted plant on a wine stain on the carpet...

Sponsored