Strut To Spindle Bolts

[Ghost50]

LMR is out of stock and CJ’s are pretty pricey.

I don’t see them on AR’s site.

Does anyone know other vendors who have them?

Sponsored

 

[boB]

Maybe I am not understanding the question but isn't this a Ford part, about $5 for a bolt and nut?

 

[Ghost50]

https://lmr.com/item/LRS-1516STHDW/2015-2017-mustang-front-strut-hardware-kit

These are the ones I’m referring to

 

[boB]

Yep, Ford OEM parts: https://www.villagefordparts.com/oe...tdXN0YW5nJnk9MjAxOSZ0PWd0JmU9NS0wbC12OC1nYXM=

 

[Ghost50]

Yep, Ford OEM parts: https://www.villagefordparts.com/oem-parts/ford-strut-lower-bolt-w715932s439?c=Zz1mcm9udC1zdXNwZW5zaW9uJnM9c3RydXRzLWFuZC1jb21wb25lbnRzJmw9NSZuPUFzc2VtYmxpZXMgUGFnZSZhPWZvcmQmbz1tdXN0YW5nJnk9MjAxOSZ0PWd0JmU9NS0wbC12OC1nYXM=

Sweet thank you!!

 

[boB]

Sweet thank you!!

You are welcome. This may not be the best or least expensive place to buy the parts, it was just the first place I looked. Many Ford dealers have an online parts department with decent discounts.

 

[NotMarc]

I walked into a local dealer and grabbed the bolts to replace mine when lowering the car. The nuts weren't at every dealer but the bolts were easy to come by.

 

[Ghost50]

Thanks!

Funny you should mention the dealer. I called the one closest to my place yesterday and they tried to tell me the part number that boB mentioned above wasn't right. Despite the Village site showing that the fitment was correct, He told me me W715295-s439 which has zero Mustang applications associated with it. I'm going to stop in there this week and talk to someone else and make sure I get the correct ones.

And you know what...thinking about it since I am putting Camber Bolts in I only really need two new ones, right?

 

[KewlWinter]

Thanks!

Funny you should mention the dealer. I called the one closest to my place yesterday and they tried to tell me the part number that boB mentioned above wasn't right. Despite the Village site showing that the fitment was correct, He told me me W715295-s439 which has zero Mustang applications associated with it. I'm going to stop in there this week and talk to someone else and make sure I get the correct ones.

And you know what...thinking about it since I am putting Camber Bolts in I only really need two new ones, right?

That is correct.

 

[Bluelightning]

Thanks!

Funny you should mention the dealer. I called the one closest to my place yesterday and they tried to tell me the part number that boB mentioned above wasn't right. Despite the Village site showing that the fitment was correct, He told me me W715295-s439 which has zero Mustang applications associated with it. I'm going to stop in there this week and talk to someone else and make sure I get the correct ones.

And you know what...thinking about it since I am putting Camber Bolts in I only really need two new ones, right?

Here's the link from Maximum motorsports if you can't find them at the dealer....

https://www.maximummotorsports.com/Bolt-Strut-to-Spindle-2015-Mustang-P1534.aspx

 

[boB]

$12.12 for four bolts at AutoNationFordWhiteBearLake plus $14.26 shipping (which seems high) or $22 plus $19.49 shipping at Maximum Motorsports. That's a couple of good 6-packs difference!

 

[Ghost50]

Here's the link from Maximum motorsports if you can't find them at the dealer....

https://www.maximummotorsports.com/Bolt-Strut-to-Spindle-2015-Mustang-P1534.aspx

Cool thanks, man. I appreciate it!

 

[GTP]

Thanks!

Funny you should mention the dealer. I called the one closest to my place yesterday and they tried to tell me the part number that boB mentioned above wasn't right. Despite the Village site showing that the fitment was correct, He told me me W715295-s439 which has zero Mustang applications associated with it. I'm going to stop in there this week and talk to someone else and make sure I get the correct ones.

And you know what...thinking about it since I am putting Camber Bolts in I only really need two new ones, right?

There are two versions. Original factory bolts are splined, and "service center" bolts are smooth for an "easier" install.
I just grind off any mushroom burrs from the ones I hammer out and then reuse them with some blue threadlock.

 

[Ghost50]

Good info thank you!

If I can’t get the splined ones I’ll do this

Sponsored