STAGE 2 ProCharger Systems for 2015 Mustangs, RELEASED!

[beefcake]

So are all the issues worked out now? I want a D1SC kit with a bullet style valve. Someone contact me so I can buy after my second PD blower buy went bad.

we can help you out with a complete kit or custom tunerkit

Sponsored

 

[proamas]

well there we go, solid results!

Okay guys i'm between the Stage II kit with a D1 compressor, ID1000s, JMS fuelmax kit, or.........a Whipple Kit.

As i stated before my goals are to be able to strap on a set of slicks at the track and knock off a 10.5 or better with 93 octane. I love the looks of the Whipple but the torque numbers seem a little low compared to the Procharger on most dyno pulls i've looked at. Price wise the kits are almost identical with the setup i want. BTW my expected rwhp is 640.

 

[beefcake]

Okay guys i'm between the Stage II kit with a D1 compressor, ID1000s, JMS fuelmax kit, or.........a Whipple Kit.

As i stated before my goals are to be able to strap on a set of slicks at the track and knock off a 10.5 or better with 93 octane. I love the looks of the Whipple but the torque numbers seem a little low compared to the Procharger on most dyno pulls i've looked at. Price wise the kits are almost identical with the setup i want. BTW my expected rwhp is 640.

our custom package with a d1, id's and the jms will take you very far and 640 shouldn't be a problem with 83

and you have the growing room of the better injectors too

 

[Process]

Okay guys i'm between the Stage II kit with a D1 compressor, ID1000s, JMS fuelmax kit, or.........a Whipple Kit.



As i stated before my goals are to be able to strap on a set of slicks at the track and knock off a 10.5 or better with 93 octane. I love the looks of the Whipple but the torque numbers seem a little low compared to the Procharger on most dyno pulls i've looked at. Price wise the kits are almost identical with the setup i want. BTW my expected rwhp is 640.

If you spec your d1 stage 2 with a 4.75 pulley you should hit 700whp on 93 no problem. If that's a decent gauge for you. Should be around 12psi.

 

[Phils15GT]

I have a 5.00 pulley and was hoping for 12lbs. I told procharger I was looking for 12lbs and that is what pulley they provided.

 

[Process]

Well I made 12psi with a 4.75 and 15 with a 4.385. When I called procharger to buy extra pullies they could not give me a definitive answer on boost just approximate since there are too many variables.

Sponsored