Roush/TVS Upgrade/Info

[Malibu78]

I would go with lund or palm beach dyno.... They seem to have the most experience with the roush.. The roush tune had its good days in cold weather, but nothing close to how it feels now..... And its 100 degrees outside.....
I never thought a tune would make so much of a difference.. I went with lund because I wanted to mount the ngauge.....

Thanks for reply. Any pics of the mounting job?

Sponsored

 

[JasinEdward]

Thanks for reply. Any pics of the mounting job?

Just a small windshield mount. It's bigger than I thought it would be. I'll try and post some up when I get a chance....

 

[dbasql]

SUB

 

[jefc73]

[MENTION=25312]Malibu78[/MENTION] where are you located in SE Michigan? Iam in Woodhaven.

 

[Malibu78]

[MENTION=25312]Malibu78[/MENTION] where are you located in SE Michigan? Iam in Woodhaven.

Rochester you're close to the mustang plant.

 

[Fatty]

Car is at Dealer for the Roush phase 2 retune/update. Will post results when I get it back. Anyone have this done yet? Results?

 

[TexasGT]

Car is at Dealer for the Roush phase 2 retune/update. Will post results when I get it back. Anyone have this done yet? Results?

Why did you have to leave it? I called today and was told to just come in. They would email Roush and get the "code" and then reflash it. 15 minute deal. I'm going in on Thursday.

 

[davidryan1987]

Still Working On This

Still Trying To Get More Power Out Of This Thing. If Anyone Wants To Check Out The Dyno Charts, Logs And Some Video On The Dyno See The Link Below.

https://www.dropbox.com/sh/cjmd3tug0vrwxr5/AAAmV6d07WcjIJ3zpZmnjmdUa?dl=0


I Am Still At The Same Power As I When The Car Has The Phase 1 Stock Roush Tune.

Since Then I Have Went With The Roush Phase 2 Pulley 80MM,BAP And Gt500 Injectors And Custom Tune And Am Still Making The Same Amount Of Power.

Needless To Say I'm A Little Disappointed And I Hope I Can Get Some More Power Out Of This Thing. If Anyone Has Any Suggestions Or Advice Let Me Know Thanks

 

[jayman33]

Still Trying To Get More Power Out Of This Thing. If Anyone Wants To Check Out The Dyno Charts, Logs And Some Video On The Dyno See The Link Below.

https://www.dropbox.com/sh/cjmd3tug0vrwxr5/AAAmV6d07WcjIJ3zpZmnjmdUa?dl=0


I Am Still At The Same Power As I When The Car Has The Phase 1 Stock Roush Tune.

Since Then I Have Went With The Roush Phase 2 Pulley 80MM,BAP And Gt500 Injectors And Custom Tune And Am Still Making The Same Amount Of Power.

Needless To Say I'm A Little Disappointed And I Hope I Can Get Some More Power Out Of This Thing. If Anyone Has Any Suggestions Or Advice Let Me Know Thanks

What are you currently running?

 

[doodguy]

Who is your tuner?

Take lid off get vmp throttle body, and 79mm pulley should put you around 700rwhp with torco. I have lund as my tuner

 

[davidryan1987]

What are you currently running?

Currently Running?

Car Is 2016 Mustang Roush Phase 2 Supercharger With Gt500 Injectors And Magniflow Street Exhaust.

Phase 1: 546 hp 493 torque

Phase 2: 548 hp 473 torque.

Phase 2 With Injectors And Kens Tune: 549 HP And 480 Torque.

 

[davidryan1987]

Who is your tuner?

Take lid off get vmp throttle body, and 79mm pulley should put you around 700rwhp with torco. I have lund as my tuner

Ken Tune Is In The Car And The Lid Is Currently Off.

 

[Doctor Fishtail]

the sct has never been able to flash over the roush tune. and the newest tunes the ngauge is having trouble too

I am Stage 1 Roush and have the SCT. We DID flash over the Roush tune. My car is proof it can be done.

 

[JasinEdward]

I am Stage 1 Roush and have the SCT. We DID flash over the Roush tune. My car is proof it can be done.

I think what he means is that is doesn't flash directly over the Roush tune. It has to load another tune first and then you flash the customer tune over that. With the NGauge it's 1 and done.

The 1st tune took about 10 minutes. After every datalog they had me flash a new tune. Those tunes took about a minute to load. This device is light years ahead of my x3 or diablosport that I used on my 2014.

 

[Doctor Fishtail]

I think what he means is that is doesn't flash directly over the Roush tune. It has to load another tune first and then you flash the customer tune over that. With the NGauge it's 1 and done.

The 1st tune took about 10 minutes. After every datalog they had me flash a new tune. Those tunes took about a minute to load. This device is light years ahead of my x3 or diablosport that I used on my 2014.

He posted NEVER been able to flash over. That is why I posted that my car is an example that it can be. Also would like to say if I could go back in time I would do Whipple not the Roush. Whipple is in here every hour supporting its customers. Roush is like a ghost around here.

Sponsored