Roush base tune to Lund.

[cbear50]

So figured I'd give everyone a review if they wanted to know. Now I'm not quite through with revisions yet but very close. I just did a wot pull from around 30-130 and holy F**k it feels like i gained another 100 HP. It's very hard to get traction now even with traction control on. Before anything after 3rd I could grip, Also my rev limiter is set at around 7500 but I shift at 7rpm and man does it pull non stop. It's crazy how just a tune made it feel. Well worth the money so far!

That's what I wanted to here! When you put the initial tune without revisions were you able to drive it ? What day would be good this week for me to come out to ft worth?

Sponsored

 

[boosted4life]

That's what I wanted to here! When you put the initial tune without revisions were you able to drive it ? What day would be good this week for me to come out to ft worth?

Yes I drove it 40 miles home but barely got into it and babied it home. Drove normal. Tuesday-Friday is fine 8am-5pm.

 

[beefcake]

tune should be driveable just stay out of boost til we give you the go ahead

 

[cbear50]

tune should be driveable just stay out of boost til we give you the go ahead

Terry, what do you think of upgrading my injectors like the OP did? Before we are dialing in the tune this be something you would recommend doing? I probably will not run any more boost than the phase 1 kit in the future so it may be unnecessary.

 

[beefcake]

do you have a bap, lund will recommend at least a bap or the id's if you really want to ring out the rpms and take full advantage

if only doing one, I usually recommend the ids. that way you have a good file, if and when (lol) you decided to pulley down, very addicting

 

[dwaleke]

Does the dealership need the whole car to flash the PCM back to stock code or can you bring in just the PCM?

 

[beefcake]

you'll need the car

if you do the ngauge over the sct, we should be able to flash it without returning to stock

so far lund has been successful with that

 

[dwaleke]

you'll need the car

if you do the ngauge over the sct, we should be able to flash it without returning to stock

so far lund has been successful with that

According to Dustin he says no:

It cannot and do not try it. The tool will have trouble going back to stock so it makes a mess. If you want to do the N-gauge. Flash the PCM back to stock and then put the N-gauge and custom cal in.

So who's right?

 

[Whipple SC]

I built a harness that simulates the car and j have a OE type bench for flashing so I can do things a dealership cannot. Dealership needs the PCM or another car to put PCM on which I doubt a dealership would do.

 

[cbear50]

Finally got my car back yesterday with the Lund tune installed. I have to admit that was a major pain in the ass ( mostly because I couldn't get a ford dealer to flash it back to stock) that being said now that it's installed I can tell you it really woke the car up. This thing pulls like a monster I have to agree with hunter it feels like another 100 horsepower.
I have to give major props to hunter(boosted4life) for his help getting the car flashed back to stock and sorting an 02 sensor issue he is a good dude. I was just about to give up on it til he offered his help.

 

[beefcake]

Finally got my car back yesterday with the Lund tune installed. I have to admit that was a major pain in the ass ( mostly because I couldn't get a ford dealer to flash it back to stock) that being said now that it's installed I can tell you it really woke the car up. This thing pulls like a monster I have to agree with hunter it feels like another 100 horsepower.
I have to give major props to hunter(boosted4life) for his help getting the car flashed back to stock and sorting an 02 sensor issue he is a good dude. I was just about to give up on it til he offered his help.

I'm glad he was able to help you out!

all good things come to those who wait!!

thanks for the business

 

[cbear50]

I'm glad he was able to help you out!

all good things come to those who wait!!

thanks for the business

Yes they do. I'm sure it won't be to long and I will be calling you about a smaller pulley. Like you said it's addicting.

 

[beefcake]

Yes they do. I'm sure it won't be to long and I will be calling you about a smaller pulley. Like you said it's addicting.

thread going right now, we are getting ready to retune with the 82mm for a member here

here was the initial dyno

http://www.mustang6g.com/forums/showthread.php?t=29111

he has a couple threads going

 

[dwaleke]

I'll be next.

Sponsored