Recommendations on suspension mods

[5.oh]

Took my 6mt to the track for the first time this weekend. Still have factory PP pzeros. Holy wheel hop. I was going to spend some money on LT's, intake and tune but never mind that. More power isn't much fun if you can't get it to the ground.

Been cruising BMR and steeda cradle and suspension upgrades and to be honest it's a little overwhelming. Reading forum posts haven't been as helpful as I'd hoped

Looking for some insight to get this wheel hop under control.

Springs will probably be done at the same time so I may also replace the shocks/struts.

Any help/advice is greatly appreciated.

Sponsored

 

[IvanCRF]

http://www.mustang6g.com/forums/showthread.php?p=856192#post856192

 

[5.oh]

http://www.mustang6g.com/forums/showthread.php?p=856192#post856192

Damn missed that. Thanks for posting the link!

 

[BMR Tech]

What were your tire pressures at? I have found, with the Pirellis...they seem to work best and wheel hop is a little less violent around 20-25psi.

I now use mine at 20....after starting at 26...and slowly working down.

CB005 is going to be the best IRS mod to start with. Grab that, drop tire pressures and let's go from there. ;)

Sponsored