Performance Package Dash Gauges

[dgc333]

Has anyone pulled the dash bezel and see how the two extra gauges in the PP are mounted. Also does the bezel just snap off.

I was thinking I would like to cut a gauge cup at an angle to shim those two gauges so the are angled toward the driver for a more direct view.

Seems strange they didn't do that from the factory.

Sponsored

 

[Twenty15]

Subbed

 

[JimmyTwoTimes]

No... although I really wouldn't recommend the DIY job, since that part -- the dash bezel and gauges, which are sold together as a single piece -- costs $1,500.

 

[Boff]

^That's why I am subbing to this thread...might as well let someone else take the first crack.

Another alternative is to fashion a lens that can be installed over the gauge to make it appear as if it is canted towards you. Calling all physicists! :hail:

 

[Rickycardo]

Maybe Roush will come out with something like this for the 2015.

 

[fanfan1214]

$1500.... where can I get this?

 

[Gst95dsm]

They really should have been angled in, it's really my only gripe with the interior.

 

[dgc333]

No... although I really wouldn't recommend the DIY job, since that part -- the dash bezel and gauges, which are sold together as a single piece -- costs $1,500.

I don't know why the fact that there are sold together would preclude it being a DIY job. It really is going to be dependant on how the gauges are mounted for me to decide whether I tackle it or not.

 

[Dirtleg]

Its interesting this thread was started. I've been thinking the same thing since I got my car 2 weeks ago. I'd expect there's a solution once a few people have a look.

Sponsored