Performance pack gauges in a non performance pack car

[Pablotheartist]

Hey guys ive been a long time lurker on the forums so i decided to make an account and i couldnt find any post on this so feel free to move it if its in the wrong spot, however is there anyway to install PP gauges in a non PP car? I have the gauges and the bezel but could not find any installs or anyone who attempted this, the gauges have 4 pins and probably run on 0-5v. Anyone have any suggestions or ideas? Thank you!

Sponsored

 

[timd38]

I found the instructions once and it is a big job because of the a/c.

 

[Pablotheartist]

Do you remember where the link was? I wouldnt mind cutting out the ac lol

 

[Cobra Jet]

Go into the interior forum on here - it's been completely done and documented extremely well by user "Zack"...

 

[MRose]

the gauges have 4 pins and probably run on 0-5v. Anyone have any suggestions or ideas? Thank you!

They are almost certainly CAN, not analog.

 

[Evil Minion]

Hey guys ive been a long time lurker on the forums so i decided to make an account and i couldnt find any post on this so feel free to move it if its in the wrong spot, however is there anyway to install PP gauges in a non PP car? I have the gauges and the bezel but could not find any installs or anyone who attempted this, the gauges have 4 pins and probably run on 0-5v. Anyone have any suggestions or ideas? Thank you!

Must not have searched too hard...
HOW TO: Swap PP gauges into standard mode

 

[hemistar1]

it will work

Hey guys ive been a long time lurker on the forums so i decided to make an account and i couldnt find any post on this so feel free to move it if its in the wrong spot, however is there anyway to install PP gauges in a non PP car? I have the gauges and the bezel but could not find any installs or anyone who attempted this, the gauges have 4 pins and probably run on 0-5v. Anyone have any suggestions or ideas? Thank you!

I have see it done here and all over ebay you can find the parts you need. Some guys are doing the N guage as an alternative as well.


http://www.ebay.com/itm/Mustang-Gt-...ash=item41abb79fdd:g:Vw8AAOSw7ehXSVIq&vxp=mtr

 

[SR56]

If I didn't have the PP I'd do the N Gauge. The vacuum gauge isn't much use and I'm pretty sure you can add oil pressure to the NG

Sponsored