Oil Pump Gears?

[VTECSAUCE]

The Roadrunner had the same OBG as the Coyote.

That being the case, wouldn't 7500 rpms be safe, granted thats NA not FI since that's the factory redline on the roadrunner? I know the 15 out of the box isn't capable of supplying power up that high but theoretically with the same manifold it should. The only other big difference being the cast vs forged Pistons. Sorry for the noob questions.

Sponsored

 

[Grimace427]

That being the case, wouldn't 7500 rpms be safe, granted thats NA not FI since that's the factory redline on the roadrunner? I know the 15 out of the box isn't capable of supplying power up that high but theoretically with the same manifold it should. The only other big difference being the cast vs forged Pistons. Sorry for the noob questions.

I rev my 2011 5.0 to 7,600rpm with my Boss intake manifold and longtubes.

 

[francisco511]

How much is the cost to install these?

 

[Grimace427]

How much is the cost to install these?

Figure a few hundred at least. The front cover and timing chains need to be removed.

 

[phunk]

TSS vs MMR.. whats the difference in cost and/or quality? Any reason we prefer one more than the other?

I dont really want to dig into that mess of a front cover, but if I have to, it shouldn't be more than a full Saturday's work.

 

[beefcake]

both are billet gears, we have tss in the blue car, we had mmr in the red car and in the yellow car.

both are supposed to be a billet gear, not sure what could be different.

 

[phunk]

Has a billet oil pump gear ever suffered a failure like the stock ones, or have they been a 100% solid solution so far?

 

[lobe50]

Now that the blowers have been running on these cars for a few months, I was curious as to if there have been many failures of the OPG's??

I guess what deters me in replacing is removing the front covers/chains.....


What kind of HP are the stock gears currently holding up to with FI?

Thanks Guys!!

 

[Dark Horse GT]

Now that the blowers have been running on these cars for a few months, I was curious as to if there have been many failures of the OPG's??

I guess what deters me in replacing is removing the front covers/chains.....


What kind of HP are the stock gears currently holding up to with FI?

Thanks Guys!!

+1

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[beefcake]

if your not getting crazy on redline or power, you should be ok

 

[rio16]

When are the TSS available in stock. Thanks

 

[beefcake]

I have a couple sets left

Sponsored