Official RTR Tech 7 Install Thread!

[nj888]

Hey Guys,

I have 305/35/20 Bf-Goodrich comp2 A/S plus on the back, I am getting some rubbing, Also, I am on steeda progressive 1-inch drop on the back. Do any one of you with this combo have rubbing Issues. I haven't got alignment yet but I am about -1.5 on the rear.

Thanks!

Sponsored

 

[CaptainSensible]

Thread bump!

Have been reading this thread with interest. I have eibach lowering springs (1 inch drop) and am considering staggered 20s I e. 9.5 front and 10.5 rear). Will this cause any rubbing issues?

 

[Fordohio]

Thread bump!

Have been reading this thread with interest. I have eibach lowering springs (1 inch drop) and am considering staggered 20s I e. 9.5 front and 10.5 rear). Will this cause any rubbing issues?

I have 7/8 of an inch drop on mine. 275/35/20 front 295/35/20 rear and ive never had rubbing.

 

[CaptainSensible]

Thank you, just what I needed to know

 

[Jonah_Evans]

I have 7/8 of an inch drop on mine. 275/35/20 front 295/35/20 rear and ive never had rubbing.

I have a 285/35/20 in the front and 305/35/20 in the rear and it completely crossed my mind when buy wheels and tires about fitment issues when lowering it. I have had eibach sportlines but have been waiting to install them bc I’m waiting to get the right camber parts. Do you think I will have rubbing issues? I hate to put the springs on them rub. I may just have to put them on and see. Thanks

 

[Polski]

Did anybody use a 19x10.5 in the front without issues?

 

[Magnetic904]

Bumping old thread,

Looking to run tech 7's 19x9.5 all the way around. My car is a PP1 car and id like to keep the factory PS4's, can i run the factory 255/40/19 on the front with a tech 7 in 19x9.5 without performance issues or fitment issues? Car is lowered on Steeda progressives

 

[2morrow]

Did anybody use a 19x10.5 in the front without issues?

That's the route I would go. I currently run an 11 up front with extended studs and a 25 mil spacer.

Handles like a dream.

 

[Polski]

That's the route I would go. I currently run an 11 up front with extended studs and a 25 mil spacer.

Handles like a dream.

I am asking because I need a spare that fits front on a PP2

 

[2morrow]

I am asking because I need a spare that fits front on a PP2

It'll work but you'll need to confirm the offset. It might require a spacer

 

[Polski]

It'll work but you'll need to confirm the offset. It might require a spacer

Will do, thanks!

 

[Nodster]

Hey all, what nuts do you need to use with these wheels? I have my eye on a set for next summer.

20" gloss black, staggered fitment. 265/35/20 front and 305/30/20 rear.

I currently use the Gorilla 61148BCX on my OEM wheels.

Thanks.

 

[Discount Tire]

Hey all, what nuts do you need to use with these wheels?

Smaller diameter (spline drive) 14x1.5 conical seat is what you need

 

[Nodster]

Smaller diameter (spline drive) 14x1.5 conical seat is what you need

Awesome, so would these Gorrila ones be suitable? Is 2" height OK?

https://www.summitracing.com/parts/gor-26144bc

 

[Discount Tire]

Awesome, so would these Gorrila ones be suitable? Is 2" height OK?

https://www.summitracing.com/parts/gor-26144bc

Those will do the trick! West Coast also offers a 14x1.5 spline that is 1.65" tall.

Details: https://westcoastacc.com/Details?pid=3174

Sponsored