Official APEX Wheels Showroom Gallery Thread

[Apex Wheels]

Appreciate it. I will have to check these out when available along with the SM-10'S if they are offered as well as both are bad ass.

There aren't any plans at this moment for a Forged SM-10. The current flow formed SM-10 is already very strong and lightweight all things considered. We make our wheels to be strong and durable first, then weight/looks come after. That said, it would be a bit difficult to really improve on the SM-10 design in a forged wheel as the weight and strength won't be a huge difference compared to what the flow formed version already offers. I feel the SM-10 becomes an even better bargain when you factor in the price, under $2k for a set shipped.

Sponsored

 

[carnut]

SM-10s squared with spacers/extended studs in front. A big thanks to Cory for all the help along the way!

 

[ModularKid21]

SM-10s squared with spacers/extended studs in front. A big thanks to Cory for all the help along the way!

Wheel/tire specs?

 

[carnut]

Wheel/tire specs?

Michelin Pilot Sport 4S - 305/30/19 19x11 ET52.

 

[TopJimmyCooks]

Michelin Pilot Sport 4S - 305/30/19 19x11 ET52.

How much are you lowered?

 

[carnut]

How much are you lowered?

I have a whipple adding weight to the front. Drop via BMR SP089/082 with ford performance shocks...

 

[keeph8n]

19x11.5 ET56 square possible with 305s?

 

[Stang55]

SM-10s squared with spacers/extended studs in front. A big thanks to Cory for all the help along the way!

I just ordered the exact same setup same color too (except my mustang is in race red). What camber plates are you running and how much degrees negative in the front? How big of a spacer are you running? Any rubbing issues in parking lots or doing full turn circles? I can't wait for mine to ship out!

 

[Apex Wheels]

19x11.5 ET56 square possible with 305s?

Possible yes, but not that practical on a non-GT350 as it will require a lot of negative camber (via plates) and still poke out slightly up front. 31mm spacer and R spec wheel studs from OPMustang are required.

 

[Apex Wheels]

Satin Black SM-10s + Accuracy Automotive's GT350R couldn't be a better combo. We are simply stunned with how this turned out!

Front: 19x11" ET26 wrapped in 305/30-19 Michelin PS4S
Rear: 19x11.5" ET56 wrapped in 325/30-19 Michelin PS4S

- Cory

 

[hiiammarcin]

Before I pull a trigger on a set, are there any new designs coming out for the 350 this year? Or group buys?

 

[Apex Wheels]

Before I pull a trigger on a set, are there any new designs coming out for the 350 this year? Or group buys?

No new designs this year, however our Forged EC-7R wheels should be available around Q1/Q2 of 2021. No Group Buys planned for the rest of the year either at this time.

 

[hiiammarcin]

No new designs this year, however our Forged EC-7R wheels should be available around Q1/Q2 of 2021. No Group Buys planned for the rest of the year either at this time.

As of today, do you know if the gold color option will be available?

 

[Apex Wheels]

As of today, do you know if the gold color option will be available?

It's hard to say, but if there's enough demand for it in the initial Group Buy launch we can definitely produce it!

 

[NightmareMoon]

Gold is going to be the new Satin Black in 2021, just wait. Everybody rollin' on gold wheels. Bronze is for wimps.

Sponsored