Official APEX Wheels Showroom Gallery Thread

[Apex Wheels]

sorry to ask so many but one last question, 3'' or 3.5'' for a 25mm in the front? using performance pack struts, so guessing 25mm is required for clearance

All good! You will want to use 3.5" up front. The 3" is really only for the rear of the car if someone wanted them back there, like the question that NightmareMoon asked.

You're also correct on a 25mm spacer being required with the factory style struts.

Cory

Sponsored

 

[Apex Wheels]

As the weather takes a turn for the worse in many parts of the nation, let's take a moment to remember how brutal the rain was at the NASA Championships down in Texas at Circuit of The Americas. Chris fought hard all week and put the newly acquired Hoosier DOT Wets to the test mounted on our 18x10" ET43 EC-7s.

- Cory

 

[Brazos609]

Do factory Ford S550 or the slightly larger diameter S197 center caps fit Apex rims?

 

[Apex Wheels]

Do factory Ford S550 or the slightly larger diameter S197 center caps fit Apex rims?

The EC-7 takes these center caps:
M-1096-CA - 1994-2001 Cobra [F8ZZ-1130-A]
XR3Z-1130-HA - SVT (Silver)
M-1096-FR - Ford Racing 13-14 GT500
M-1096-J - 2000 Cobra R
M-1096-K - 2001 Bullit [1R3Z-1130-AA]

The SM-10 takes this cap: FR3Z-1130-C

Due to Ford producing a boatload of different center caps, it's impossible for us to make a wheel that fits all of the caps. All wheels do ship with the APEX logo center cap as well.

Cory

 

[Apex Wheels]

NASA AZ racers Drew and Chris teamed up to take on the WHP Enduro which resulted in a class win and 2nd place overall. Mulitple sets of 18x11" ET52 EC-7 wheels were used and Hoosier R7's consumed on the way to victory. Good job fellas!

Aaaaand about to be overtaken by a Miata.

- Cory

 

[NightmareMoon]

Here and I was hoping for pictures of the SM-10s group buy wheels before they ship out...

 

[NightmareMoon]

Lookie what showed up on Wednesday. Four new 19x11 ET52 SM-10 wheels in Anthracite ready for tires (which go on Monday)

IMG_3129

• NightmareMoon
• Dec 14, 2018

Virgin wheel, straight out of the box

 

[Apex Wheels]

Nothing I love more than seeing everyone so excited to open up their SM-10 wheels! Un-boxing shots for the win

19x11.5" ET56 on the FRONT?? Yes sir, when paired with R spec studs and 31mm spacers from OP Mustang.

- Cory

 

[NightmareMoon]

Got my half-worn 285/35 RE71R tires mounted today on the 11s. Pics coming by the end of the week.

 

[Apex Wheels]

Got my half-worn 285/35 RE71R tires mounted today on the 11s. Pics coming by the end of the week.

Excellent! I know those tires run a little wide so should be a good fit on the 11s.

 

[NightmareMoon]

Here are a few. I was hoping to get to the track today for a better photo op, but its closed today. I should get some better shots in a few days.

285/35R19 RE71Rs, Steeda Comp DR shocks, 25mm spacers, camber for daaays.

 

[Grimace427]

Here are a few. I was hoping to get to the track today for a better photo op, but its closed today. I should get some better shots in a few days.

Love that color combo!

 

[NightmareMoon]

Thanks man. The other color option were bright silver or black. My street wheels are black for the full murdered out look, but this is the sporting setup (autox and track days) so frankly, the closer to the color of brake dust, the better.

But they sure do look nice while they’re shiney and new!

 

[Grimace427]

In a perfect world I'd go for something between the anthracite and silver, like a mercury color.

 

[Apex Wheels]

Jae finished up his winter upgrades which included a set of the new SM-10 wheels on his Mustang GT. Find him out on the local AutoX courses tearing it up.

19x11" ET52 SM-10 in Race Silver
295/30-19 Toyo Proxes
ARP extended studs in the front
25mm spacers in the front
Steeda camber plates with -2.7*
Ford Performance track handling pack

- Cory

Sponsored