Need your input on my alignment specs

[Southview]

Correct. Not to mention the plethora of threads that answer the exact same question. It's like the search feature doesn't even exist.

You funny guy. You got me good. . But, I had a guy contact me with a bunch of questions about stuff I did to my car on here years ago. He was new to modifying anything. Only to be given major advice all over the forum a week later.

Sponsored

 

[DRAGOON]

0.16 is 1/16 an inch.

With all due respect, 1/16” is 0.0625 (1.0 divide by 16 = 0.0625 )
0.16 is close to 5/32” ( 0.15625 which is 0.00375 less than 5/32” )

 

[Dana Pants]

With all due respect, 1/16” is 0.0625 (1.0 divide by 16 = 0.0625 )
0.16 is close to 5/32” ( 0.15625 which is 0.00375 less than 5/32” )

1/16 inch over the length of the tires, so about 24 inches. You can measure toe in inches or degrees depending on the tools you use.

 

[Southview]

I can tell if an alignment is good just by looking at it with my good eye.

 

[WItoTX]

You funny guy. You got me good. . But, I had a guy contact me with a bunch of questions about stuff I did to my car on here years ago. He was new to modifying anything. Only to be given major advice all over the forum a week later.

I always help those folks. I welcome DM's if someone finds an old thread of mine, or a response I made. That is how we learn. Identify our problem, search for a solution, then ask for help from more experienced people who have had the same issues.

Not starting a new thread with zero context, for a problem that has been discussed a thousand times, and we even have a sub thread discussing the topic.

Sponsored