Need help with offset

[heardme]

Hi guys,

New here, I'm planning on purchasing a set of Forgestar CF5V's in 19x10 and 19x11.

I searched up the offset for a car running 19x10's all around and he was running +40 ET which looked good.

Since I'm going 19x11 in the rear, would I be going w/ a +65 ET offset?

Thanks in advance!

Sponsored

 

[Need4SpeedMotors]

Easy fix so Forgestar does their own in house offsets and or if you like you can do the following which I have done and works great.

19x10 ET 35
19x11 ET 50

Let me know if I can help you out.

 

[sigintel]

Classy support from Paul as always!

 

[Need4SpeedMotors]

Classy support from Paul as always!

Thank you sir.

 

[Randy954]

So basically any 19s with the same width will have those offsets? I'm currently looking for wheels but I'm lowered on the eibach sport lines. 1.5inch drop I believe so I'm looking for a flush fitment that won't rub

 

[Need4SpeedMotors]

So basically any 19s with the same width will have those offsets? I'm currently looking for wheels but I'm lowered on the eibach sport lines. 1.5inch drop I believe so I'm looking for a flush fitment that won't rub

Well it also comes down to wheel design for instance if yoru aiming for a lipped wheel with a huge lip then offsets vary. But if your aiming for a wheel that is full face and concave then yes these specs can work out a vast majority of them time.

if you desire I can help you find some options that work great with the drop you have.

 

[heardme]

Ah, thanks for the reply. I'll be honest and say I forgot about this post soon after I posted it due to the fact that the vendor I purchased from (a vendor from my previous car's forum) told me that Forgestar would choose the correct offset for my vehicle and I wouldn't need to worry about finding the correct offset.

Again, thank you, I really appreciate it.

 

[Need4SpeedMotors]

No worries.

Sponsored