Help with tire offset

[Squints2See]

Hi folks,

I'm new to the community and somewhat of a novice when it comes to car mechanics.

I was wondering if this wheel would work on my 2015 GT:

http://mirowheels.com/type-111/

Miro Type 111 Wheels
20x9.5 5x114.3 18 73.1 Conical Silver / Machine Polish Face

They are listing the "18" column as E.T. I assume this is the offset? Is this too low of an offset for our cars. I am looking for an aggressive concave look which I'm assuming I would need a low offset to achieve this. I currently have the optional 20" Foundry wheels and although I don't know what it's offset is, I see guys putting up to 1" spacers on them to achieve the flush with the fender look. Also, I know the 73.1 is not the same size as our hub and I would need a hubcentric ring. Is that correct?

Thanks for any help you all can give.....

Todd

Sponsored

 

[Squints2See]

well I just found some wheel calculators and it looks like that size will make the wheels stick out about 1/4" past the fenders :(

Does anyone know of any similarly styled wheels or semi-deep concave wheels that will work on our cars?

 

[Aarron_M]

Read the wheel and tire subsection of the forum, and you'll find lots of options. Also, stickied at the top of this thread is a wheel picture thread with lots of information. Go through there and see what you like. There are a few vendors that offer some options, and a quick private message to any of them could get you some options also.

Sponsored