Lowering springs!

[Cordero1]

I got no room. With a 275/35 before , I could t get my pinkie between tire and fender and old owner gave it the poke look , so tires were under lip and was hitting

so dropped go a 305/20 and AM PP wheel, just waiting for lug nuts to set it down abs assess.

Also noticed. Stress has billet Shims so to speak, that go on top of the springs to fine tune it in. I might go that way. But still looks like a pain in the asap to loosen all up and slide then in

https://www.steeda.com/steeda-s550-mustang-billet-rear-spring-spacer-1-4-inch-555-8251.html



cool
Interested to see how it looks once on the ground
I just fixed/got new tires/wheels, see above reply. And looking at fine tuning my setup

Just go back one page on this thread. I posted front & side pics when I brought it back down. Got about a finger & a half width of space between tire & fender. I have no rub issues on either front/rear left/right. I feel its too much tire but theyre on now so too late to peddle back.

Sponsored

 

[Mustangfreek]

can kinda see

how big /what size tires?

 

[Cordero1]

can kinda see

how big /what size tires?

20×11 on 305/35 rears & 20×10 on 285/35 front.

 

[mkcotton]

I purchase the Ford Performance Mustang Magnaride handling pack (M-9602-M) a few years back (I love it). However, they were not offering MagneRide Performance Pack VDM Software Upgrade dongle at the time. I've tried to find it with no luck. Any ideas?
https://performanceparts.ford.com/part/M-9602-M

 

[Doug V]

I purchase the Ford Performance Mustang Magnaride handling pack (M-9602-M) a few years back (I love it). However, they were not offering MagneRide Performance Pack VDM Software Upgrade dongle at the time. I've tried to find it with no luck. Any ideas?
https://performanceparts.ford.com/part/M-9602-M

I am looking for that too. I want to buy the M-9602-M but I already have the springs. That means I would be paying $650 for the VDM software.

 

[mkcotton]

I am looking for that too. I want to buy the M-9602-M but I already have the springs. That means I would be paying $650 for the VDM software.

Well... if you find it, let me know. I'll do the same.

 

[Mustangfreek]

20×11 on 305/35 rears & 20×10 on 285/35 front.

gotcha
That’s a sorta tall tire 28”
+

I just put 305/30’s on mine as previous owner has it low and has the stretched wheel/tire , poke dealio..yuk

I have a thread going this section going Also

 

[Cordero1]

gotcha
That’s a sorta tall tire 28”
+

I just put 305/30’s on mine as previous owner has it low and has the stretched wheel/tire , poke dealio..yuk

I have a thread going this section going Also

Yes it is tall both on front & rear. But I curved & cracked my last set of rims on 30 side profile due to our crappy roads, so rather have a tall tire with more cushion. Also track is a 4 hr drive with no shoulder on the highway so I needef a tire to gaurd my rims a bit on the way there. I dont like the look as much, but will have to do. I dont have a trailer to haul it around in.

Sponsored