yellowstangatl
Well-Known Member
I was running the same wheels on the front with 255 40 18s. I have theb4 piston brakes so they fit with no issue.Do you have the same wheels on the front?
Sponsored
I was running the same wheels on the front with 255 40 18s. I have theb4 piston brakes so they fit with no issue.Do you have the same wheels on the front?
Will these fit the rear of our cars? I've heard they won't does anyone have input?many people use 17x9 99-04 cobra wheels
99 GT 17x8 will fitWill these fit the rear of our cars? I've heard they won't does anyone have input?
You MIGHT have an issue with the offset/backspacing on those as far as fitment with the fender goes, but if it's only for track use, who cares? Lol.Sweet. I just ordered these after seeing an s550 with 17x9 cobra wheels on the back. Only $99 per wheel and after my discount only paid $187 for both! Can't beat that compared to the ~$600 for two race stars. Also ordered 275/40/17 nt05rs to put on them so only paid about $562 for the whole rear setup
http://www.americanmuscle.com/silver-sc-17x9.html
You might want to go with a 9" wheel. If you look around you can find old cobra r wheels cheap. I went with the 8" wheel and my car sways bad. I just ordered a set of skinny wheels to see if that helps. If I were to do it again I would buy some cheap 9" wheels.Well Im picking up a set of New Edge GT wheels like GSLS has this weekend. $75 bucks for both in great shape. Now just have to find the best price on 28x10 Hoosiers, any input?
99- GT is the lightest wheight forged wheel . The 8" is fine . I've run 1.52 60ft on that wheel . With full size radials on the front you will get some sway with the bias ply slick no matter the rim size . Make sure not to over correct . Matched bias ply skinnies will smooth it all out . The cobra wheels I've weighed were 26lbs and up .
With the A6 you can just run a drag radial . A Slick is good for the M6 . Doesn't really make a difference on the auto . The bias ply absorbs the drivtrain shock of the manual .Well shit! any other available tire on for that 8" rim?
Yea just trying to find one that will work. Not very knowledgeable in drag tires.With the A6 you can just run a drag radial . A Slick is good for the M6 . Doesn't really make a difference on the auto . The bias ply absorbs the drivtrain shock of the manual .
He is right about the drag radials. I would only go with drag radials if I had an auto.Yea just trying to find one that will work. Not very knowledgeable in drag tires.