Hood lift kit

[mc68386]

Actually, they're not fine. The set I put on my convertible in 2018 will no longer hold the hood up. They stopped lifting the hood about a year after I installed them, and it actually slammed shut a few weeks ago in the driveway shortly after I opened it and walked away. They'll be replaced with Redlines, which is what is on the V6. Buyer beware.

I have Steeda and they failed at about the same time.

Sponsored

 

[Prymetime1]

+1 Red lines.

 

[Hollywood29]

What is the best hood lift kit for a 2021 mustang gt convertble

Wifey bought the Ford performance kit for x-mas. Took 30 minutes to do. Easy if you have basic tools

 

[ChrisJ]

Scott Drake is another option, like mine a lot

 

[Duece McCracken]

Scott Drake is another option, like mine a lot

Oh schnapp, those are sexy.

How'd they clear the washer line?

 

[ChrisJ]

Oh schnapp, those are sexy.

How'd they clear the washer line?

No problem, little gap behind the bracket tucks in there perfect. Had to Dremel where the back bolt goes didn't fit at first. Wasn't to bad

 

[Duece McCracken]

No problem, little gap behind the bracket tucks in there perfect. Had to Dremel where the back bolt goes didn't fit at first. Wasn't to bad

Gotcha! Loving those brackets!

 

[ChrisJ]

Gotcha! Loving those brackets!

You can kind of see how the washer line routes under it

 

[#1ford]

They look well made

 

[Duece McCracken]

You can kind of see how the washer line routes under it

Very nice! About 130 a set is very competitive considering the mounts! I dont completely love the washer hose interference on the Redline Elites for 2018 plus, and I antiseize all contact areas, which the redline brackets have minimal mounting on my 2019 Bullitt. The brackets rotate some without the friction.

Scott Drake mounts are superb. If the strut is as good, then they may be best in slot.

 

[vdngo]

I had the FP in my 19 convertible and did not like the single point of attachment for the lower bracket… pulled them out and replaced them with the Roush ones and am much happier with the Roush. No matter how I tried I couldn’t get the lower bracket on the driver side to tighten straight.

Sponsored