Heat Soak:( Intercooler?

[MAPerformance]

Kick ass, black core = same cost?

Yup, same cost. The whole intercooler will be black heat treated. We did testing on it and it wasn't a huge benefit over a non-treated core so we are just going to do a limited run and continue production on just raw cores. We saw about +3-5 ° cooler temps. For the time spent making them black, it isn't worth it.

Sponsored

 

[mach1]

Yup, same cost. The whole intercooler will be black heat treated. We did testing on it and it wasn't a huge benefit over a non-treated core so we are just going to do a limited run and continue production on just raw cores. We saw about +3-5 ° cooler temps. For the time spent making them black, it isn't worth it.

Well I'll take a black one if it's not too late, save me the time of painting mine!
My order is shipping to Andrew Ln in TX.

 

[stang77]

Should start shipping next week if everything goes smooth!

Cool!!

 

[MAPerformance]

Well I'll take a black one if it's not too late, save me the time of painting mine!
My order is shipping to Andrew Ln in TX.

Order updated!

 

[mach1]

Order updated!

Thank you!

 

[Mishimoto]

John, where are your intercoolers made?

Our products are manufactured in a variety of facilities. Mishimoto is a global provider with offices in Delaware, Los Angeles, Birmingham United Kingdom and Shanghai, China. All products are designed, engineered and tested in New Castle, Delaware at our corporate headquarters using state of the art machinery (CMM arms, AWD Dyno, Rapid Prototyping, etc.). The manufacturing location depends on the product in question. For example, all of our intercooler pipes for diesel trucks are made in Los Angeles. Our stamped aluminum brackets come from Texas. Our EB Mustang intercooler referenced in this post is made in China, under strict control of our American operated Shanghai branch. We try to make as many parts in the States as possible, where feasible. With that said, much like Samsung or Apple, it comes down to the engineering behind the part and the quality control of the manufacturing. With a lifetime warranty on every part we manufacture, it is safe to say our parts are of the highest quality.

Thanks
-John

 

[[email protected]]

Yup, same cost. The whole intercooler will be black heat treated. We did testing on it and it wasn't a huge benefit over a non-treated core so we are just going to do a limited run and continue production on just raw cores. We saw about +3-5 ° cooler temps. For the time spent making them black, it isn't worth it.

How do I get a black one?

 

[MAPerformance]

How do I get a black one?

If you already have it on order just drop me a pm with your order number and I will change it.

If you haven't ordered yet just drop me a pm with your email and I'll send you a checkout link for black core!

Thank you.

 

[Billy1]

If you already have it on order just drop me a pm with your order number and I will change it.

If you haven't ordered yet just drop me a pm with your email and I'll send you a checkout link for black core!

Thank you.

So with a tune on an otherwise stock EBM, when you add the MAP intercooler will you see any additional hp?, or just consistent power for what you already have.

 

[MAPerformance]

So with a tune on an otherwise stock EBM, when you add the MAP intercooler will you see any additional hp?, or just consistent power for what you already have.

You will definitely get additional power. If you take a look at my intercooler versus stock intercooler above, you can see that there is additional timing to be had with cooler charge air temperatures. More timing = More Power!

 

[m4udin]

Is the whole I tercooler black or just the core?

 

[MAPerformance]

The whole intercooler.

 

[m4udin]

Are they still available? If so just order off the web site web site and PM you for a black one?

 

[Mishimoto]

Yeah there was no cracks in my mishimoto IC. All the welds were nice and clean.

Good to hear! How did the installation go? Any feedback on performance/cooling benefits thus far?

Thanks for picking up our cooler!

-John

 

[mach1]

Good to hear! How did the installation go? Any feedback on performance/cooling benefits thus far?

Thanks for picking up our cooler!

-John

I want to add that I LOVE the engineering effort that you guys are sharing with the world on your website, please keep it up!

Sponsored