Headers installation, Minnesota

[nibjones]

Hey guys! I am trying to find a place to install my headers but most shops either way expensive or they don’t have any appointments available until November. Does anyone know a place or a person who installs headers on mustangs, it’s a 2021 GT. Thanks in advance!

Just bite the bullet and do it yourself. They’re not terribly difficult, just time consuming

Sponsored

 

[vinny89gt]

I did mine with a buddy. My review:

 

[I Bleed Ford Blue]

I put stainless power headers on 2 different S-550's lying on my back. Here's my advice, the drivers side is easy, the passenger side is a MF. Get yourself an engine lifting bar from harbor freight, about 80 bucks, and a stretch belt tool. You need to support the engine because you have to pull the motor mounts out of the car to get the headers in. On the passenger side, remove the A/C belt and loosen the bolts holding the A/C compressor to the engine so you gain about a 1/4" more clearance, you will need it. Also you need a set of E-torx sockets, you can get them at harbor freight for about 20 bucks. You need to to pull 6 of the 8 studs out on the passenger side and IIRC it takes an E-7. The top two back studs can stay in but the rest need to come out.

Sponsored