bobc775
Well-Known Member
- Joined
- Jan 10, 2015
- Threads
- 4
- Messages
- 81
- Reaction score
- 9
- Location
- Littleton,CO
- Vehicle(s)
- 2015 Mustang GT PP, Gaurd
- Thread starter
- #1
I got my ProCharger Stage 2 installed last weekend. It was a bigger pain than I thought it would be but I just kept moving forward and got it done.
However, after installing the supplied tune and firing it up I found that I have a hanging throttle. When you’re driving long at say 2000 rpm and depress the clutch the engine stays at that rpm. I’ve been told that one cause could be a vacuum leak. Other causes seem to point towards the tune. I’ve gone over the car and installation all week and cannot find a leak.
Has anyone experience this while installing a supercharger? This is becoming very frustrating..
However, after installing the supplied tune and firing it up I found that I have a hanging throttle. When you’re driving long at say 2000 rpm and depress the clutch the engine stays at that rpm. I’ve been told that one cause could be a vacuum leak. Other causes seem to point towards the tune. I’ve gone over the car and installation all week and cannot find a leak.
Has anyone experience this while installing a supercharger? This is becoming very frustrating..
Sponsored