Grille options

[MAGS1]

I may have attempted this with the bullitt grille, but I actually decided to go a different direction… did a bit more research and cervini C series grew on me so going with their upper and lower

I would assume the install would be almost identical. The clips are part of the bumper not the grille. Either way, good luck and post up some pics when completed!

Sponsored

 

[Mach 307]

I would assume the install would be almost identical. The clips are part of the bumper not the grille. Either way, good luck and post up some pics when completed!

Will do my friend!

 

[Jpump]

I haven't done the bullit grilles yet, but I plan to. They just snap onto the tabs on the bumper like the stock grille.

I recently bought a Cervinni's grille set off Facebook because I've always liked the look of them. They use a bracket that screws into the grille that squeezes the bumper tabs over a lip on the grilles. I wasn't able to use them because the previous owner of my car somehow broke too many lower grille tabs so I didn't want to risk it flopping around in there.

 

[Mach 307]

I haven't done the bullit grilles yet, but I plan to. They just snap onto the tabs on the bumper like the stock grille.

I recently bought a Cervinni's grille set off Facebook because I've always liked the look of them. They use a bracket that screws into the grille that squeezes the bumper tabs over a lip on the grilles. I wasn't able to use them because the previous owner of my car somehow broke too many lower grille tabs so I didn't want to risk it flopping around in there.

Either way either or will look great and you can’t go wrong! Sorry about the issues with the lower. I feel like that’s why some people had complaints about the kit and others didn’t… had to be an installation error since it’s a bit more complex.

 

[Mach 307]

I again changed my mind and I am going with the MP Concepts Upper and Lower… was between that and the RTR but I like the fanged look of the MP Concepts.

 

[Mach 307]

Received the Cervini’s and just wasn’t blown away by the quality

 

[Mach 307]

I again changed my mind and I am going with the MP Concepts Upper and Lower… was between that and the RTR but I like the fanged look of the MP Concepts.

Okay so apparently with this one there’s issues fitting the bumper onto the car after install? What’s with all these options having issues… lol. I made my final choice and went with the black, non LED RTR upper and lower.

 

[MAGS1]

Okay so apparently with this one there’s issues fitting the bumper onto the car after install? What’s with all these options having issues… lol. I made my final choice and went with the black, non LED RTR upper and lower.

RTR should be good fitment wise considering they partner with Ford so they’ve probably got all the specs from Ford. Some of the other aftermarket companies don’t get that info, so they have to take their own measurements off of a car they purchased or a donor car. Some of this stuff the fitment is so tight, if it’s off even a little bit it won’t fit right. Material quality could be a factor also.

Sponsored