Fuse 62?

[GigaHz]

Will this work for fuse 62? I had this on my C6 exhaust.

http://www.amazon.com/2006-2013-Corvette-Mild2Wild-Exhaust-Remote/dp/B001RK54EY

Sponsored

 

[Travis@boostworks]

Yep.. That'll work.

 

[JasinEdward]

That's a pretty cool device there...

 

[GigaHz]

You could make it cheaper. I wonder what they used for the fuse? Maybe just a fuse with the element cut out.

http://www.ebay.com/itm/231041308446?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

 

[GTBOB]

My dad has this on his '11 Z06. Key fob is double-sided taped on the console.

 

[2015 DIB GT]

Very cool idea. Never thought of doing that. Would be really cool if it could be programmed to one of the garage door opener buttons.

 

[Jmeo]

If I may ask, what would this do? I have not heard anything about fuse 62.

Jaime

 

[GigaHz]

Pulling fuse 62 turns traction control 100% off.

 

[JasinEdward]

It also disables stability controls, abs, and the ability to use track apps.

 

[2015 DIB GT]

You sure about track apps? I know launch control won't fully work but the car does hold the RPM you set it to in launch control even without the fuse. I will try line lock to see if that works. The other ones I don't care too much about.

 

[JasinEdward]

I pulled fuse 62 last night and went and tried to do a 0-60 on my track apps. I get to the point where it says "press ok to start" but it wont go any further. I put the fuse back and it works fine.

 

[Whipple SC]

If I may ask, what would this do? I have not heard anything about fuse 62.

Jaime

You don't have to worry, that's what they need to fix the Roush kits :doh::doh:

Ha ha:cheers: Very cool device, actually quite a few things could be utilize this.....

 

[Jmeo]

You don't have to worry, that's what they need to fix the Roush kits :doh::doh:

Ha ha:cheers: Very cool device, actually quite a few things could be utilize this.....

I see, I was thinking to my self that I didn't have this problem and now it makes sense. Thank you!

 

[GigaHz]

If the tires are warm, the engine is warm and the road is perfectly smooth, mine pulls like a bastard. I can go through the gears and it just keeps pulling. It never pulls power or falls on its face. Any little bump in the road though and it acts funny. I get no lights but, but I think the ABS is kicking in. Sometimes it breaks the tires loose, but then it just spins. I haven't done a drag start, just street starts.

 

[BMR Tech]

You could make it cheaper. I wonder what they used for the fuse? Maybe just a fuse with the element cut out.

http://www.ebay.com/itm/231041308446?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

If you get the part you linked above, which appears to be exactly what the M2W kit uses - you would then simply buy an "add a circuit" (that handles the appropriate amperage) and solder it in to the wires, likely the Red and White like the M2W kit.

I may have to pick one of these kits up soon - I heard Lethal offers them, or will be soon. ;)

Sponsored