Forscan

[Cux211]

Have a 23 mach1 and need to kill the annoying double honk can one of the forscan gurus walk me through where to find it and kill it?
thanks

Sponsored

 

[dirtwarrior]

a thread already exist for this

 

[Cux211]

a thread already exist for this

Have a link because I can’t find it hence why I asked

 

[dirtwarrior]

it is called change the as built

 

[NJ3]

Try the sticky thread "Modifying As Build Data Guide" in the DIY.

 

[Cux211]

Will do, when I searched I just put in forscan at first got jack then tried double honk got nothin again

 

[NJ3]

Will do, when I searched I just put in forscan at first got jack then tried double honk got nothin again

Or try this one. https://www.mustang6g.com/forums/th...-disable-double-horn-honk.147828/post-3023926

 

[Cux211]

Or try this one. https://www.mustang6g.com/forums/th...-disable-double-horn-honk.147828/post-3023926

Seems like everything is in that hexadecimal crap is there no plain English settings for the mustangs my 22 f250 6.7 just about everything is in plain English just click enable or disable none of that changing code stuff

 

[Sariandan]

When you connect to forscan, there is an option to go to a regular user interface with those options. I don't remember what it is, whichever one for each module that isn't As-Built.

So, for instance, when you are looking at the list of modules, you'll see BCM with an As-Built format and a BCM that is not As-Built. That second one will be plain english.

 

[swoop1156]

Will do, when I searched I just put in forscan at first got jack then tried double honk got nothin again

Or try this one. https://www.mustang6g.com/forums/th...-disable-double-horn-honk.147828/post-3023926

Seems like everything is in that hexadecimal crap is there no plain English settings for the mustangs my 22 f250 6.7 just about everything is in plain English just click enable or disable none of that changing code stuff

When you connect to forscan, there is an option to go to a regular user interface with those options. I don't remember what it is, whichever one for each module that isn't As-Built.

So, for instance, when you are looking at the list of modules, you'll see BCM with an As-Built format and a BCM that is not As-Built. That second one will be plain english.

This is what you need Cux. I found this by searching "double honk". Should be case closed man.

726-63-02 / XXX0 XXXX XXYY / Disable Double Honk on Exit

 

[Cux211]

When you connect to forscan, there is an option to go to a regular user interface with those options. I don't remember what it is, whichever one for each module that isn't As-Built.

So, for instance, when you are looking at the list of modules, you'll see BCM with an As-Built format and a BCM that is not As-Built. That second one will be plain english.

I’ll look for that thanks, if there’s no plain English I’ll probably just say the hell with it lol

Sponsored