Forscan will not work ........... Ugh!

[cactus_kid]

So today my tuner hooked up his laptop to turn off the double honk feature. Forscan will not even recognise the the BCM.

Sponsored

 

[Epiphany]

Can you elaborate on what your screen showed when Forscan wouldn't "recognize the the BCM."

 

[cactus_kid]

I was standing outside the car. I will be back at his shop wen he installs the splash guards. I will take a screen shot and post it. My hearing is very much shot after siamese tours in Nam.

 

[wilkinda65]

I was standing outside the car. I will be back at his shop wen he installs the splash guards. I will take a screen shot and post it. My hearing is very much shot after siamese tours in Nam.

Splash guards??? Front or rear? Ford or aftermarket?

 

[cactus_kid]

Splash guards??? Front or rear? Ford or aftermarket?

From RPI. I do not believe Ford has them. These are no drill vs the rok blox.

 

[cactus_kid]

Part # : https://www.rpidesigns.com/shop/item.aspx?itemid=5419

 

[cactus_kid]

Buy the premium btw, better material. Worth the up charge IMHO. Had them on the HEP and the Bullitt. They blend in nicely.

 

[cactus_kid]

Evidently due to the Mach 1 being as was the Bullitt a "frankenstein" motor", the PCM and tune is specific to this car. As such, it will be a nightmare to tune and/or install FI. That is the primary reason Roush/Ford Performance never had a blower kit for the Bullitt. I was told that the electrical harness had different connectors and that the limited take rate did not justify the cost of a new tune and, wiring harness.

 

[FreePenguin]

so you really cant connect forscan? I see that as being weird, I would imagine it would recognize it no different than anything else.

I know some tunes, it locks out forscan, are you saying this mach 1 did it as well? thats sad if so

 

[Atlas1]

Evidently due to the Mach 1 being as was the Bullitt a "frankenstein" motor", the PCM and tune is specific to this car. As such, it will be a nightmare to tune and/or install FI. That is the primary reason Roush/Ford Performance never had a blower kit for the Bullitt. I was told that the electrical harness had different connectors and that the limited take rate did not justify the cost of a new tune and, wiring harness.

I don’t think the lack of a roush blower for the bullitt was related to being difficult to tune. The limited take rate just made it not worth the effort. Whipple has a bullitt kit. So does procharger. Plenty of tuned bullitts out there.

 

[ACMEguy]

Mike, will they work with the front fender flares and the rear 'half-flares' on the HP? Can you post some pics once they are on your car?

 

[wilkinda65]

Buy the premium btw, better material. Worth the up charge IMHO. Had them on the HEP and the Bullitt. They blend in nicely.

Site says fits 2015 to 2017. I remember now I had these on my 2015 LE. These fit without issue on 2021?

 

[cactus_kid]

Mike, will they work with the front fender flares and the rear 'half-flares' on the HP? Can you post some pics once they are on your car?

Sure

 

[cactus_kid]

Site says fits 2015 to 2017. I remember now I had these on my 2015 LE. These fit without issue on 2021?

RPI sucks at updating their website.

 

[hbash]

RPI sucks at updating their website.

In spite of their web site sucking, does RPI have mud flaps for the Mach 1 and if, please point me at them. Thanks.

Sponsored