Fixed

[Waferz]

Hey guys, stuck mid OPG install.

Does anyone have a video or instructions on how to remove the fuel system part that goes through the valve cover on the passenger side? I have been trying to remove the bolt going through the bracket but it locks up a bit and I don’t want to break anything.

Any help is greatly appreciated, I’ve been searching for hours and could not find anything on removing this.

pump circled in red, bolt that is locking up circled in blue

Thanks in advance!

Sponsored

 

[ice445]

That's the high pressure fuel pump. I'm pretty sure you have to remove that crash foam protector covering it to properly access the bolts to remove it, but I haven't done it myself.

 

[Waferz]

That's the high pressure fuel pump. I'm pretty sure you have to remove that crash foam protector covering it to properly access the bolts to remove it, but I haven't done it myself.

That’s what I figured it was. All of the OPG videos are 15-17 and don’t have it.
The foam covering appears to be held on by the bolt that’s circled. I’m almost sure that’s what comes out first but it’s been a long day so I figured it’s best to ask before breaking something!

 

[Waferz]

Got it

 

[ice445]

Got it

Glad to hear it. Make sure to find the torque sequence for reinstallation, it's not something you can afford coming loose because it will 100% burn your car down, lol. I don't know if some of the hardware is single use, but the procedure is very specific.

Sponsored